Fluke 43B Power Quality Analyzer Specifications

The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. All in a rugged handheld package.

• Combines the most useful capabilities of a power quality analyzer, multimeter and scope Calculates 3-phase power on balanced loads, from a single-phase measurement 
• Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current  
• Records two selectable parameters for up to 16 days
• 20 measurement memories to save/recall screens and data with cursor readings
• FlukeView® Software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st  harmonic
• Measures resistance, diode voltage drop, continuity, and capacitance
• Users/applications manual and power quality video to help answer tough questions
• Complete package with voltage probes and 400 A current clamp, FlukeView Software and optically isolated interface cable
• Monitoring functions help track intermittent problems and power system performance

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 43B Power Quality Analyzer, please click on the "Request Quote" button below.

Dranetz-BMI PG4400 Power Quality Analyzer Specifications 

Measured Parameters

• (4) differential inputs, 1-600V rms, AC/DC, 0.1% rdg , 256 samples/cycle, 16bit ADC
• (4) inputs with CTs 0.1-3000A rms, AC/DC, 256s/c, 0.1% rdg + CTs, 16 bit ADC
• Frequency range, 10mHx resolution, 45-65 Hz
• Phase Lock Loop - Standard PQ mode

Monitoring/Compliance Modes

• IEEE 1159
• IEC 61000-4-30
• EN50160
• Current Inrush / Energization
• Voltage Fault recording
• Quality of Supply (EN50160 or annunciator)
• Long Term Monitoring
• Continuous Data Logging w/min/max/avg

Power Quality Triggers

• Cycle-by-cycle analysis
• 256 samples/cycle; 1/2 cycle RMS steps
• L-L, L-N, N-G RMS Variations: Sags/swells/interruptions)
• RMS Recordings V& I (x/x/x cycles)
• Waveform Recordings (2/6/2 cycles)
• Low and Medium Freq Transients - V & I
• Harmonics Summary Parameters
• Cross trigger V & I channels
• RMS Event Characterization (IEEE or IEC) Distortion/Power/Energy • W, VA, VAR, TPF, DPF, Demand, Energy
• Harmonics/Interharmonics per IEC 1000-4-7
• THD/Harmonic Spectrum (V,I,W) to 63rd
• TID/Interharm. Spectrum (V,I) to 63rd
• Flicker per IEC 1000-4-15 (Pst,Plt,Sliding Plt)
• CF, KF, TDF, TIF
• Unbalance (rms dev. & sequencing components)

General Specifications

• Size (HxWxD): 12" x 2.5" x 8" (30cm x 6.4cm x 20.3 cm)
• Weight: 3.8 pounds(1.8 kg)
• Operating Temperature: 0 -50 (32 to 122 )
• Storage Temperature: -20 to 55 (4 to 131 F)
• Humidity: 10 to 90% non-condensing
• System Time Clock: Crysal controlled, 1 second resolution
• Charger /Battery Eliminator: 90-264 VAC 47-63 Hz
• Display: LCD color touch screen
• Memory options (must have one): 32M-128M removable compact flashcard

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Dranetz-BMI PG4400 Power Platform Quality Analyzer, please click on the "Request Quote" button below.

Dranetz-BMI Power Platform PP1 Specifications

Customize the PP1 to suit your needs. Insert a Dranetz-BMI TASKCard®, and the PP1 becomes a different device with a new set of functions. TASKCards include PQPlus, 8000(Energy/Harmonics), Inrush, and TASKCard Flicker.

Features & Highlights

• Portable Package
• Eight Channel, 4 Voltage and 4 Current
• Easy Start™ for automated set-ups (TASKCards PQPlus and Flicker)
• Scope Mode®
• Meter Mode
• TASKCard® Operating System Technology
• Measure Power Quality, Harmonics, Energy, InRush, and Flicker
• Measure V,I,W, VA,VAR,PF, Demand & Energy (TASKCard 8000)
• Cycle-by-Cycle Disturbance Capture (TASKCard PQPlus)
• Two Hour UPS
• Menu Driven Operation
• RS-232 Serial Interface
• Waveform Capture (TASKCard PQPlus)
• Simultaneous Channel Capture
• Classifies Power Quality Disturbances to IEEE 1159 (TASKCard PQPlus)
• Classifies Voltage Flicker in Accordance with IEC-868 (TASKCard Flicker)
• Time Plot Any Monitored Parameter
• Integral PC Memory Card Interface
• Supported by Dran-View PC Analysis and Report Writer

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Dranetz-BMI Power Platform PP1, please click on the "Request Quote" button below.

Dranetz BMI DSP 4300 features and highlights

• Portable Handheld Package, weighs less than 4lbs.
• Rugged Rubber Boot
• Eight Channel, 4 Voltage and 4 Current
• Easy Startª for automated set-ups
• Battery or AC Operation
• Scope Mode
• Meter Mode
• Time Plot Any Monitored Parameter
• Menu Driven Operation
• Patented TASKCard¨ Operating System Technology
• Measure Power Quality, Harmonics and Energy with TaskCard PQLite
   Measure V,I,W, VA,VAR,PF,Demand & Energy
   Cycle-by-Cycle Disturbance Capture
   Waveform Capture
   Simultaneous Channel Capture
   Classifies Power Quality Disturbances to IEEE 1159 -Recommended Practice for Power Quality
• Monitoring
• Energy Management with TASKCard 808
• Optional RS-232 Serial Interface
• Integral PC Memory Card Interface Option
• Lockable, Portable Case for outdoor use and harsh environments
• DRANVIEW PC Analysis and Report Writer Software

Applications

• Power Quality Troubleshooting
• Harmonic Susceptibility Monitoring
• Energy Management Monitoring

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Dranetz-BMI PP4300 Power Platform Quality Demand Analyzer, please click on the "Request Quote" button below.

Fluke 345 Power Quality Clamp Meter Specifications

The ideal meter for commissioning and troubleshooting modern electrical loads.

With a bright color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Additionally, the Hall Effect measurement system makes measurement of dc current possible without the need to break the circuit, and the internal memory enables long-term logging for analysis of
trends or intermittent problems.

• AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
• Highest safety rating: 600 V CAT IV rated for use at the service entrance
• Accurate in noisy environments: Even with distorted waveforms present on electronic loads with low-pass filter
• Data logging: Identify intermittent faults by logging any power parameters for minutes or months, including harmonics
• Verify batteries: Direct measurement of dc ripple (%) for battery and dc systems
• Troubleshoot harmonics: Analyze and log harmonics digitally or graphically
• Inrush current: Capture and analyze nuisance tripping, from 3 seconds to 300 seconds
• Easy to use: Easily confirm instrument setup with large backlit color display of waveforms and trends
• 3-Phase power: Built in capability for balanced loads
• View graphs and generate reports: With included Power Log software

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 345 Power Quality Clamp Meter , please click on the "Request Quote" button below.

The Fluke 434 three-phase power quality analyzers help you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use handhelds are a “must have” for any person who maintains or troubleshoots three phase distribution. The new IEC standards for flicker and power quality are built right in to take the guess work out of monitoring.

• Records all your necessary values in a three phase system.
• Minimal setup required with intuitive menus.
• Highest safety rating in the industry.
• Four voltage and four current channels.
• Captures waveform data on all phases simultaneously.
• System-Monitor: Six power quality parameters on one dashboard
• Automatic Transient display: Never miss an event.
• Auto Trend: Don’t waste time setting up recordings.
• Rugged, handheld recorder.
• Seven hours operating time per charge on NiMH battery pack.
• Transfer data files to your PC for reporting and analysis using FlukeView® software.

CAT IV 600 V and CAT III 1000 V safety rating Designed to help protect you and your equipment  against electrical shock and fire, the Fluke 430 Series analyzers, accessories and charger are all certified to meet the stringent safety standards for use in CAT IV 600 V and CAT III 1000 V environments. They are the first tools of their kind to carry the CAT IV rating and therefore can be used at virtually all power connections and outlets in a low-voltage power distribution system.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 434 three-phase power quality analyzer, please click on the "Request Quote" button below.

Fluke 435 Three-Phase Power Quality Analyzer

The Fluke 435 three-phase power quality analyzers help you locate, predict, prevent and troubleshoot problems in three- and single-phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The new IEC standards for flicker, harmonics and power quality are built right in to take the guess work out of power quality.

The Fluke 435 is fully compliant with the new IEC 61000-4-30 Class-A standard. With this powerful capability, all measurements will be consistent and reliable in accordance with the latest international standard.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 435 Three-Phase Power Quality Analyzer, please click on the "Request Quote" button below.