Marconi 2023A Signal Generator, 9 kHz to 1.2 GHz

• Wide frequency coverage:- 9 kHz to 1.2 GHz (2023A)
• Excellent spectral purity
• Linear and logarithmic sweep mode
• RPP to 50 W
• Sine, triangular and square wave two tone modulation source
• RS-232 and GPIB control
• Comprehensive modulation:- AM, FM, OM , Pulse & FSK
• 3.9 kHz Bessel filtered FSK
• Optional +25 dBm RF output
• SINAD Measurement Option

The 2023A/B and 2025 signal generators are portable and lightweight, offering carrier frequencies from 9 kHz to 1.2 GHz (2023A), 9 kHz to 2.05 GHz (2023B) and 9 kHz to 2.51 GHz (2025) with a wide choice of modulation modes.
The instruments are suitable for a wide range of applications in laboratory, production, and maintenance environments.
The GPIB facility allows the unit to be included in ATE systems for faster manufacturing throughput. An RS-232 interface is provided with a command set in common with the GPIB to simplify remote control of the signal generator in basic test systems or via a modem.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2023A Signal Generator, 9 kHz to 1.2 GHz, please click on the "Request Quote" button below.

Agilent 8648C Signal Generator Technical Specifications

Receiver testing has reached a new level of affordability. Ideal for in-channel receiver testing, Agilent Technologies’ additions to the economy line of RF signal generators offer improved performance at affordable prices. The 8648A/B/C/D provide 1, 2, 3.2 and 4 GHz coverage, respectively, with a simple user interface and the quality and reliability you expect from Agilent Technologies products.

Sensitivity
Sensitivity measurements are easy to perform with the economy signal generator’s wide dynamic range. Covering the operating range of even the most sensitive receivers, the 8648A offers +10 to –136 dBm, while the 8648B/C/D provide +13 to –136 dBm output power levels. With ±1 dB level accuracy to –127 dBm below 1GHz, you can be assured of accurate repeatable measurements every time. Determine receiver sensitivity in seconds by scrolling through required test levels. With independent amplitude and frequency control knobs, amplitude levels can be changed almost instantly. Low RF leakage levels are necessary to successfully test today’s sensitive receivers. The 8648 series meet these requirements with typically less than 1 μV leakage (nominally equivalent to 0.1 μV when measured with a two-turn loop).

8648C, 9 kHz to 3.2 GHz Signal Generator

Resolution
Settable
8648A/B/C/D: 0.001 Hz

Display
10 Hz

Accuracy
Typically ± 3x10–6 x carrier frequency (Hz),
±0.15x10–6 x carrier frequency (Hz) for Option 1E5

Switching speed (typical)
8648A/B/C/D
<1001 MHz: <75 ms
≥1001 MHz: <100 ms

To add options to a model, use the following ordering
scheme:
Example

Model # 8648C
Model # option# 8648C-1EA
Model # option# 8348C-1E2

Options
Model # 1EA High output power 1
Model # 1E2 Modulation generator
Model # 1E5 High stability time base
Model # 1E6 Pulse modulation 1
Model # 1EP Pager signaling capability 2

For pricing information, or to receive an official price quotation for the Agilent 8648C Signal Generator, please click on the "Request Quote" button below.

Rohde and Schwarz SMIQ Vector Signal Generator     

• Frequency range 300 kHz to 2.2 GHz/3.3 GHz/4.4 GHz/6.4 GHz
• Analog and digital modulation
• Versatile and broadband generation of digitally modulated signals up to 18 Msymbol/s
• Generation of TDMA, CDMA, WCDMA and CDMA2000 standard signals to all main mobile radio standards
• Broadband I/Q modulator with outstanding vector accuracy
• Optional internal fading simulator to test specifications of mobile radio standards
• Optional internal noise generator and distortion simulator
• Optional BER measurement
• Optional arbitrary waveform generator
• Low ACP for IS-95 CDMA and WCDMA (option)
 
Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMIQ Vector Signal Generator, please click on the "Request Quote" button below.

Agilent 8648D Signal Generator Technical Specifications

Receiver testing has reached a new level of affordability. Ideal for in-channel receiver testing, Agilent Technologies’ additions to the economy line of RF signal generators offer improved performance at affordable prices. The 8648A/B/C/D provide 1, 2, 3.2 and 4 GHz coverage, respectively, with a simple user interface and the quality and reliability you expect from Agilent Technologies products.

Sensitivity measurements are easy to perform with the economy signal generator’s wide dynamic range. Covering the operating range of even the most sensitive receivers, the 8648A offers +10 to –136 dBm, while the 8648B/C/D provide +13 to –136 dBm output power levels. With ±1 dB level accuracy to –127 dBm below 1GHz, you can be assured of accurate repeatable measurements every time. Determine receiver sensitivity in seconds by scrolling through required test levels. With independent amplitude and frequency control knobs, amplitude levels can be changed almost instantly. Low RF leakage levels are necessary to successfully test today’s sensitive receivers. The 8648 series meet these requirements with typically less than 1 μV leakage (nominally equivalent to 0.1 μV when measured with a two-turn loop).

8648D, 9 kHz to 4 GHz

Resolution
Settable
8648A/B/C/D: 0.001 Hz

Display
10 Hz

Accuracy
Typically ± 3x10–6 x carrier frequency (Hz),
±0.15x10–6 x carrier frequency (Hz) for Option 1E5

Switching speed (typical)
8648A/B/C/D
<1001 MHz: <75 ms
≥1001 MHz: <100 ms

8648C, 9 kHz to 4.0 GHz

To add options to a model, use the following ordering
scheme:
Example

Model # 8648D
Model # option# 8648D-1EA
Model # option# 8348D-1E2

Options
Model # 1EA High output power 1
Model # 1E2 Modulation generator
Model # 1E5 High stability time base
Model # 1E6 Pulse modulation 1
Model # 1EP Pager signaling capability 2

For pricing information, or to receive an official price quotation for the Agilent 8648D Signal Generator, please click on the "Request Quote" button below.

Marconi 2024 Signal Generator, 9 kHz to 2.4 GHz

• Wide frequency coverage:- 9 kHz to 2.4 GHz (2024)
• Linear and logarithmic sweep mode
• RPP to 50 W
• Sine, triangular and square wave two tone modulation source
• RS-232 and GPIB control
• Comprehensive modulation facilities:- Amplitude, Frequency, Phase, Pulse & FSK
• Excellent rack space efficiency
• Simple operation through menu selection of modes
• DC operation option
• Optional +25 dBm RF output

The 2023 and 2024 signal generators are portable and lightweight, offering carrier frequencies from 9 kHz to 1.2 GHz (2023), 9 kHz to 2.4 GHz (2024).
The instruments are suitable for a wide range of applications in laboratory, production, and maintenance environments.
The GPIB facility allows the unit to be included in ATE systems for faster manufacturing throughput. The inclusion of an RS-232 interface, with a command set to the GPIB facility, simplifies remote control of the signal generator in basic test systems or via a modem.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2024 Signal Generator, 9 kHz to 2.4 GHz, please click on the "Request Quote" button below.

Marconi 2030 Signal Generator, 10 kHz to 1.35 GHz

A high performance signal generator with programmable modulation sources and LF output, wide modulation bandwidths, sweep capability and excellent accuracy.

Features:
• Wideband Cover: 10 kHz to 1.35 GHz
• 0.1 Hz frequency resolution
• 0.1 Hz to 500 kHz modulation oscillator
• Wideband FM with 10 MHz bandwidth
• Single, dual, composite and dual composite modulation modes
• GPIB programming (IEEE 488.2 standard)
• Simple operation through menu selection of modes

For pricing information, or to receive an official price quotation for the Marconi 2030 Signal Generator, 10 kHz to 1.35 GHz, please click on the "Request Quote" button below.

Marconi 2031 Signal Generator, 10 kHz to 2.7 GHz 

A high performance signal generator with programmable modulation sources and LF output, wide modulation bandwidths, sweep capability and excellent accuracy.

Features:
• Wideband Cover: 10 kHz to 2.7 GHz
• 0.1 Hz frequency resolution
• 0.1 Hz to 500 kHz modulation oscillator
• Wideband FM with 10 MHz bandwidth
• Single, dual, composite and dual composite modulation modes
• GPIB programming (IEEE 488.2 standard)
• Simple operation through menu selection of modes

For pricing information, or to receive an official price quotation for the Marconi 2031 Signal Generator, 10 kHz to 2.7 GHz, please click on the "Request Quote" button below.

Marconi 2032 Signal Generator, 10 kHz to 5.4 GHz

A high performance signal generator with programmable modulation sources and LF output, wide modulation bandwidths, sweep capability and excellent accuracy.

Features:
• Wideband Cover: 10 kHz to 5.4 GHz
• 0.1 Hz frequency resolution
• 0.1 Hz to 500 kHz modulation oscillator
• Wideband FM with 10 MHz bandwidth
• Single, dual, composite and dual composite modulation modes
• GPIB programming (IEEE 488.2 standard)
• Simple operation through menu selection of modes

For pricing information, or to receive an official price quotation for the Marconi 2032 Signal Generator, 10 kHz to 5.4 GHz, please click on the "Request Quote" button below.

Agilent E8663B Analog Signal Generator     

Industry’s Best Close-To-Carrier Phase Noise Performance
The E8663B analog signal generator provides the industry’s lowest close-to-carrier phase noise available in an off-the-shelf signal generator. With included analog modulation (AM, FM, ØM, and pulse) capability, superior level accuracy and high output power, the E8663B is the right choice for demanding applications such as radar system development, satellite communications evaluation, or when a very low noise local oscillator or reference signal is needed. Built on the outstanding legacy of the 8663A, the E8663B delivers improved performance and is fully code compatible with its predecessor for seamless upgrades to existing test systems. Enhanced narrow pulse modulation and extended support life are optionally available.

Signal Characteristics
• 100 kHz to 3.2 or 9 GHz with .001 Hz resolution
• -135 to +18 dBm typical output power
• Provides the best close-to-carrier phase noise and specified down to 1 Hz offset from carrier

Modulation
• AM, FM, ØM, and pulse (may be simultaneously enabled)
• Typical 8 ns rise/fall times and 20 ns pulse width from 10 MHz to 9 GHz
• Dual internal function generators: sine, square, triangular, ramp, and noise

Automation and Communication Interface
• 10BaseT LAN and GPIB
• SCPI and IVI-COM drivers
• Backwards compatible with the 8662A and 8663A signal generators
• Compatible with the E5500 and 3048A phase noise test systems

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8663B Analog Signal Generator, please click on the "Request Quote" button below.

Agilent 83630B Synthesized Swept-Signal Generator, 10 MHz to 26.5 GHz      

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 83630B Synthesized Swept-Signal Generator, 10 MHz to 26.5 GHz, please click on the "Request Quote" button below.

Agilent 83640B Synthesized Swept-Signal Generator, 0.01 to 40 GHz       

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 83640B Synthesized Swept-Signal Generator, 0.01 to 40 GHz, please click on the "Request Quote" button below.

Agilent 83650B Synthesized Sweep Signal Generator, 10 MHz to 50 GHz       

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 83650B Synthesized Sweep Signal Generator, 10 MHz to 50 GHz, please click on the "Request Quote" button below.

Agilent 83732B Synthesized Signal Generator, 0.01 to 20 GHz

The Agilent 83732B synthesized signal generator sets a new standard for performance at a price that is surprisingly affordable. No longer will you have to give up frequency coverage, modulation or reliability to meet your budget. This signal source will perform beyond your expectations at a price within your reach. Fundamental oscillators and switched low-pass filters deliver <-55 dBc harmonics, eliminate subharmonics and suppress spurious to <-60 dBc. This signal source provides plenty of output power (typically >+14 dBm), while spectral purity is maintained even at high power levels (typical output power at frequencies below 1 GHz is +20 dBm).

• Pulse modulation for testing radar and EW receivers
• Scan modulation for simulating a scanning antenna
• Frequency modulation for simulating comms data
• Phase modulation for satellite and radar applications

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 83732B Synthesized Signal Generator, 0.01 to 20 GHz, please click on the "Request Quote" button below.

Anritsu MG3633A Signal Generator, 10.0 kHz 2.7 GHz 

The MG3633A has excellent frequency resolution, frequency switching speed, signal purity, and a high output level, in addition to amplitude, frequency, and phase modulation functions. Also, sweep functions are provided for carrier frequency, output level, and modulation frequency so an appropriate sweep can be performed for various devices to be measured.

Features:
• Low noise
• High accuracy and high-output level
• Modulation characteristics
• Quasi-microwave output

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu MG3633A Signal Generator, 10.0 kHz 2.7 GHz, please click on the "Request Quote" button below.

Anritsu MG3641A Signal Generator, 125 kHz 1040 MHz

New Anritsu synthesizer technology permits frequencies to be set with a resolution of 0.01 Hz across the full frequency range. And the non-harmonic spurious is better than –100 dBc for reliable measurement at any frequency. A unique low-noise YIG oscillator produces a high-purity signal with SSB phase noise of better than –130 dBc/Hz (1 GHz, 20 kHz offset) making these signal generators excellent for interference testing of radio receivers and as sources for various local and reference signals.
The MG3461A supports a range of 125 kHz to 1040 MHz.

Features:
• 0.01 Hz, 0.01 dB setting resolution
• High signal purity (–100 dBc spurious)
• Versatile modulation functions

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu MG3641A Signal Generator, 125 kHz 1040 MHz, please click on the "Request Quote" button below.

Anritsu MG3642A Signal Generator, 125 kHz 2080 MHz

New Anritsu synthesizer technology permits frequencies to be set with a resolution of 0.01 Hz across the full frequency range. And the non-harmonic spurious is better than –100 dBc for reliable measurement at any frequency. A unique low-noise YIG oscillator produces a high-purity signal with SSB phase noise of better than –130 dBc/Hz (1 GHz, 20 kHz offset) making these signal generators excellent for interference testing of radio receivers and as sources for various local and reference signals.
The MG3642A supports a range of 125 kHz to 2080 MHz.

Features:
• 0.01 Hz, 0.01 dB setting resolution
• High signal purity (–100 dBc spurious)
• Versatile modulation functions

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu MG3642A Signal Generator, 125 kHz 2080 MHz, please click on the "Request Quote" button below.

Rohde and Schwarz SM300 Vector Signal Generator, 9 kHz to 3 GHz       

The Vector Signal Generator R&S®SM300 offers all the features required of a general purpose signal generator: wide frequency range, large variety of modulation functions and high reliability - at an extremely attractive price.

The fields of application of the R&S®SM300 are virtually unlimited in development, servicing or production where it is used as a flexible signal source in automatic test systems.

The built-in I/Q modulator is ideal for generating digitally modulated signals. An external two-channel arbitrary waveform generator (e.g. R&S®AM300) serves as a modulation source.

•Frequency range: 9 kHz to 3 GHz
•Modulation types: AM, FM, φM, Pulse and I/Q
•NF output: 20 Hz to 80 kHz
•SSB phase noise <-95 dBc (fc = 1 GHz, 20 kHz offset, 1 Hz measurement bandwidth)
•Level uncertainty < 1dB (fc > 100 kHz, Level >-120 dBm, 20°C to 30°C)
•Graphical oriented user interface
•USB interface

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SM300 Vector Signal Generator, 9 kHz to 3 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMA100A Signal Generator, 9 kHz to 3 GHz   

Key features
Excellent signal quality
• Very low SSB phase noise of typ. –135 dBc (20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth), typ. –140 dBc with the Enhanced Phase Noise Performance option (R&S®SMA-B22)
• Wideband noise of typ. –160 dBc (>10 MHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth)
• Nonharmonics of typ. –100 dBc (>10 kHz carrier offset, f < 1500 MHz, with the R&S®SMA-B22 option)
• High-stability reference oscillator as standard
• Very low phase noise at low frequencies due to internal division of the fundamental frequency range (750 MHz to 1500 MHz) down to 6.6 MHz
 

Ideal for use in production
• Very short frequency and level setting times of <3 ms across the entire frequency and level range, <450 μs in list mode
• Fast hopping mode with flexibly addressable frequency and level pairs, as fast as normal list mode
• Frequency setting time of typ. 10 μs within a bandwidth of up to 80 MHz due to direct access to the DDS-based synthesizer (with the option R&S®SMA-B20 or -B22; FM EXTERNAL DIGITAL mode)
• Very high level accuracy and repeatability
• High output power of up to +18 dBm, overrange up to +28 dBm
• Electronic attenuator with built-in overvoltage protection over entire frequency range
• Minimum space requirements due to compact size (only two height units)

Mil/Aero applications
• Pulse modulator with excellent characteristics (on/off ratio typ. 100 dB, rise/fall time typ. 10 ns)
• Pulse generator integrated as standard
• Optional high-performance pulse generator with minimum pulse width of 20 ns (R&S®SMA-K23)
• Optional removable mass storage (compact flash disk, R&S®SMA-B80)
• Optional VOR/ILS modulation (R&S®SMA-K25)
• Optional operating altitude up to 4600 m (R&S®SMA-B46)

All-purpose instrument
• Frequency range of 9 kHz to 3 GHz (R&S®SMA-B103/-B103L) or 6 GHz (R&S®SMA-B106/-B106L)
• Frequency, level and LF sweeps
• AM, broadband FM/φM (SMA-B20 or -B22), pulse modulation
• Built-in LF generator up to 1 MHz, optional multifunction generator (R&S®SMA-K24) up to 10 MHz
• Optional low-jitter clock synthesizer up to 1.5 GHz (R&S®SMA-B29)

Intuitive operating concept
• Color display with 320 × 240 pixels (¼ VGA)
• Intuitive user interface with graphical display of signal flow (block diagram)
• Context-sensitive online help

Versatile interfaces
• Remote control via GPIB or LAN
• USB connectors (e.g. for keyboard, mouse, memory stick)
• Connector for R&S®NRP power sensors for precise power measurements
• Selectable SCPI- or 8662A/63A-compatible IEC/IEEE bus command set
• Control via remote operation tool (e.g. VNC)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMA100A Signal Generator, 9 kHz to 3 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMATE200A Signal Generator, 100 kHz to 6 GHz       

Digital Standard EUTRA/LTE available
Based on the successful R&S®SMU200A platform, the R&S®SMATE200A is specifically designed for production environments. As such, the display and front panel user interface have been removed, the connectors moved to the rear, and performance has been optimized for fastest setting times to improve factory throughput. Like the R&S®SMU200A, however, the two-generators-in-one concept has been kept, occupying four height units – a plus for production where space is at a premium. All of this is available without compromising the excellent RF performance and baseband flexibility synonymous with the R&S®SMU200A.

Designed for production
•Very short setting times for frequency and level (e.g. for frequency changes <2 ms over GPIB and <400 μs in List mode)
•Fast Hop mode offering flexibly addressable frequency/level pairs; as fast as normal List mode
•Multisegment waveform function enables fast switching between different test signals in waveform generator
•Special hardware triggers for basic functions
•Electronic attenuator for entire frequency and level range
•Status LEDs on front, connectors on rear
•Revised cooling concept for longer life in production

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMATE200A Signal Generator, 100 kHz to 6 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMIQ02B Signal Generator, 300 kHz to 2.2 GHz   

Vector Signal Generator R&S SMIQ - Digital signals of your choice
• Frequency range 300 kHz to 2.2 GHz/3.3 GHz/4.4 GHz/6.4 GHz
• Analog and digital modulation
• Versatile and broadband generation of digitally modulated signals up to 18 Msymbol/s
• Generation of TDMA, CDMA,WCDMA and CDMA2000 standard signals to all main mobile radio standards
• Broadband I/Q modulator with outstanding vector accuracy
• Optional internal fading simulator to test specifications of mobile radio standards
• Optional internal noise generator and distortion simulator
• Optional BER measurement
• Optional arbitrary waveform generator
• Low ACP for IS-95 CDMA and WCDMA (option)
• Low cost of ownership due to three-year calibration intervals
• Future-oriented platform concept

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMIQ02B Signal Generator, 300 kHz to 2.2 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMIQ03B Signal Generator, 300 kHz to 3.3 GHz  

Vector Signal Generator R&S SMIQ - Digital signals of your choice
• Frequency range 300 kHz to 2.2 GHz/3.3 GHz/4.4 GHz/6.4 GHz
• Analog and digital modulation
• Versatile and broadband generation of digitally modulated signals up to 18 Msymbol/s
• Generation of TDMA, CDMA,WCDMA and CDMA2000 standard signals to all main mobile radio standards
• Broadband I/Q modulator with outstanding vector accuracy
• Optional internal fading simulator to test specifications of mobile radio standards
• Optional internal noise generator and distortion simulator
• Optional BER measurement
• Optional arbitrary waveform generator
• Low ACP for IS-95 CDMA and WCDMA (option)
• Low cost of ownership due to three-year calibration intervals
• Future-oriented platform concept

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMIQ03B Signal Generator, 300 kHz to 3.3 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMIQ03HD Signal Generator, 300 kHz to 2.2 GHz

Features:
• Wide dynamic range: ACLR 70 dB typ. for 3GPP test model 1, 64 DPCH
• Single-carrier scenarios, enhanced features with option R&S SMIQB57 (3GPP downlink)
  –Further improvement of ACLR (77 dB typ.)
  –High output power (up to +30 dBm PEP)
• Multicarrier scenarios: integrated baseband filters to improve ACLR of 1 to 4 WCDMA carriers
• Short frequency and level setting time
• Optional fading simulator (R&S SMIQB14/B15) and noise generator/ distortion simulator (R&S SMIQB17)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMIQ03HD Signal Generator, 300 kHz to 2.2 GHz, please click on the "Request Quote" button below.

Fluke 6060B Synthesized Signal Generator, 10 kHz to 1.05 GHz

For pricing information, or to receive an official price quotation for the Fluke 6060B Synthesized Signal Generator, 10 kHz to 1.05 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMIQ06B Signal Generator, 300 kHz to 6.4 GHz 

Vector Signal Generator R&S SMIQ - Digital signals of your choice
• Frequency range 300 kHz to 2.2 GHz/3.3 GHz/4.4 GHz/6.4 GHz
• Analog and digital modulation
• Versatile and broadband generation of digitally modulated signals up to 18 Msymbol/s
• Generation of TDMA, CDMA,WCDMA and CDMA2000 standard signals to all main mobile radio standards
• Broadband I/Q modulator with outstanding vector accuracy
• Optional internal fading simulator to test specifications of mobile radio standards
• Optional internal noise generator and distortion simulator
• Optional BER measurement
• Optional arbitrary waveform generator
• Low ACP for IS-95 CDMA and WCDMA (option)
• Low cost of ownership due to three-year calibration intervals
• Future-oriented platform concept

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMIQ06B Signal Generator, 300 kHz to 6.4 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMJ100A Vector Signal Generator, 100 kHz to 6 GHz

Digital Standard EUTRA/LTE available
The R&S®SMJ100A meets all challenges that diverse applications place on modern vector signal generators. For example, it offers the signal quality and flexibility required in research and development - not to mention a convenient graphical user interface (GUI). And this is by no means all the R&S®SMJ100A has to offer - a fact that becomes evident in production, where it excels with its flexible baseband and low setting times. The baseband meets all requirements, from providing realtime signals to replaying precalculated waveforms.

High signal quality
• IQ modulator with 200 MHz RF bandwidth
• Very low SSB phase noise of typ. - 133 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth)
• Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
• Excellent ACLR performance of typ. +69 dB for 3GPP FDD (test model 1, 64 DPCHs)
• High-stability reference oscillator as standard
• High level repeatability

Ideal for production
• Very short frequency and level setting times (<2 ms); only 450 µs in List mode
• Electronic attenuator up to 6 GHz over the full level range
• Flexible high speed measurements with RF List mode and multisegment waveforms

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMJ100A Vector Signal Generator, 100 kHz to 6 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SML01 Signal Generator, 9.0 kHz to 1.1 GHz         

The Signal Generator family R&S® SML offers all features required of a state-of-the-art general-purpose signal generator: wide frequency range, large variety of modulation functions and high reliability – at an extremely attractive price. The fields of application of the R&S SML are virtually unlimited in development, servicing or production where it is used as a flexible signal source in automatic test systems. R&S SML benefits both from our long-standing experience in the field of signal generators and the latest technology. Its uses are as versatile as its functionalities.

Features:
•9 kHz to 1.1 GHz
•SSB phase noise:<-122 dBc (1 Hz)(at f = 1 GHz, Δf = 20 kHz)
•Setting times <10 ms
•High level accuracy (deviation <0.5 dB at levels >-120 dBm)
•High reliability through electronic attenuator
•Digital frequency and level sweep
•AM/FM/φM
•Optional pulse modulator with integrated pulse generator
•3-year calibration cycle

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SML01 Signal Generator, 9 kHz to 1.1 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SML02 Signal Generator, 9 kHz to 2.2 GHz         

The Signal Generator family R&S® SML offers all features required of a state-of-the-art general-purpose signal generator: wide frequency range, large variety of modulation functions and high reliability – at an extremely attractive price. The fields of application of the R&S SML are virtually unlimited in development, servicing or production where it is used as a flexible signal source in automatic test systems. R&S SML benefits both from our long-standing experience in the field of signal generators and the latest technology. Its uses are as versatile as its functionalities.

Features:
•9 kHz to 2.2 GHz
•SSB phase noise:<-122 dBc (1 Hz)(at f = 1 GHz, Δf = 20 kHz)
•Setting times <10 ms
•High level accuracy (deviation <0.5 dB at levels >-120 dBm)
•High reliability through electronic attenuator
•Digital frequency and level sweep
•AM/FM/φM
•Optional pulse modulator with integrated pulse generator
•3-year calibration cycle

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SML02 Signal Generator, 9 kHz to 2.2 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SML03 Signal Generator, 9 kHz to 3.3 GHz

The Signal Generator family R&S® SML offers all features required of a state-of-the-art general-purpose signal generator: wide frequency range, large variety of modulation functions and high reliability – at an extremely attractive price. The fields of application of the R&S SML are virtually unlimited in development, servicing or production where it is used as a flexible signal source in automatic test systems. R&S SML benefits both from our long-standing experience in the field of signal generators and the latest technology. Its uses are as versatile as its functionalities.

Features:
•9 kHz to 3.3 GHz
•SSB phase noise:<-122 dBc (1 Hz)(at f = 1 GHz, Δf = 20 kHz)
•Setting times <10 ms
•High level accuracy (deviation <0.5 dB at levels >-120 dBm)
•High reliability through electronic attenuator
•Digital frequency and level sweep
•AM/FM/φM
•Optional pulse modulator with integrated pulse generator
•3-year calibration cycle

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SML03 Signal Generator, 9 kHz to 3.3 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMP02 Signal Generator, 10 MHz to 20 GHz
        
The R&S®SMP Microwave Signal Generator is a reliable, high-precision signal source featuring high output power, high spectral purity and excellent pulse modulation. It is able to supply different modulations for any measurement on radar and communication equipment. A wide range of options ensures universal use in R&D, production, EMC and environmental measurements as well as in material testing.
• High output level >+11.5 dBm
• Optional pulse modulator and pulse generator
• Digital RF, AF and level sweep
• Storage of 50 complete instrument setups
• Optional phase modulator
• ASK/FSK modulation, phase offset settings
• Extremely low SSB phase noise at 10 GHz (<–105 dBc (1 Hz) at 10 kHz from carrier)
• Very short frequency setting time <11 ms + 5 ms/GHz
• Extremely high level accuracy <±0.9 dB at 0 dBm in frequency range 10 MHz to 40 GHz

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMP02 Signal Generator, 10 MHz to 20 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMP03 Signal Generator, 10 MHz to 27 GHz
        
The R&S®SMP Microwave Signal Generator is a reliable, high-precision signal source featuring high output power, high spectral purity and excellent pulse modulation. It is able to supply different modulations for any measurement on radar and communication equipment. A wide range of options ensures universal use in R&D, production, EMC and environmental measurements as well as in material testing.
• High output level >+13 dBm
• Optional pulse modulator and pulse generator
• Digital RF, AF and level sweep
• Storage of 50 complete instrument setups
• Optional phase modulator
• ASK/FSK modulation, phase offset settings
• Extremely low SSB phase noise at 10 GHz (<–105 dBc (1 Hz) at 10 kHz from carrier)
• Very short frequency setting time <11 ms + 5 ms/GHz
• Extremely high level accuracy <±0.9 dB at 0 dBm in frequency range 10 MHz to 40 GHz

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMP03 Signal Generator, 10 MHz to 27 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMP04 Signal Generator, 10 MHz to 40 GHz
        
The R&S®SMP Microwave Signal Generator is a reliable, high-precision signal source featuring high output power, high spectral purity and excellent pulse modulation. It is able to supply different modulations for any measurement on radar and communication equipment. A wide range of options ensures universal use in R&D, production, EMC and environmental measurements as well as in material testing.
• High output level >+10 dBm
• Optional pulse modulator and pulse generator
• Digital RF, AF and level sweep
• Storage of 50 complete instrument setups
• Optional phase modulator
• ASK/FSK modulation, phase offset settings
• Extremely low SSB phase noise at 10 GHz (<–105 dBc (1 Hz) at 10 kHz from carrier)
• Very short frequency setting time <11 ms + 5 ms/GHz
• Extremely high level accuracy <±0.9 dB at 0 dBm in frequency range 10 MHz to 40 GHz

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMP04 Signal Generator, 10 MHz to 40 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMP22 Signal Generator, 10 MHz to 20 GHz

The R&S®SMP Microwave Signal Generator is a reliable, high-precision signal source featuring high output power, high spectral purity and excellent pulse modulation. It is able to supply different modulations for any measurement on radar and communication equipment. A wide range of options ensures universal use in R&D, production, EMC and environmental measurements as well as in material testing.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMP22 Signal Generator, 10 MHz to 20 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMR20 Signal Generator, 10 MHz to 20 GHz  
        
Features:
• Standard version: CW generator with pulse modulation and digital frequency sweep
• Easily upgradeable to AM/FM signal generator and synthesized sweep generator with analog ramp sweep owing to flexible options concept
• Optional pulse generator for radar and EMC applications
• Optional IF input for upconversion of digitally modulated IF signals
• Compact, lightweight, user-friendly: ideal in the lab and for field applications
• 3-year calibration cycle 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMR20 Signal Generator, 10 MHz to 20 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMR27 Signal Generator, 10 MHz to 27 GHz 
        
Features:
• Standard version: CW generator with pulse modulation and digital frequency sweep
• Easily upgradeable to AM/FM signal generator and synthesized sweep generator with analog ramp sweep owing to flexible options concept
• Optional pulse generator for radar and EMC applications
• Optional IF input for upconversion of digitally modulated IF signals
• Compact, lightweight, user-friendly: ideal in the lab and for field applications
• 3-year calibration cycle 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMR27 Signal Generator, 10 MHz to 27 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMR40 Signal Generator, 10 MHz to 40 GHz  
        
Features:
• Standard version: CW generator with pulse modulation and digital frequency sweep
• Easily upgradeable to AM/FM signal generator and synthesized sweep generator with analog ramp sweep owing to flexible options concept
• Optional pulse generator for radar and EMC applications
• Optional IF input for upconversion of digitally modulated IF signals
• Compact, lightweight, user-friendly: ideal in the lab and for field applications
• 3-year calibration cycle 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMR40 Signal Generator, 10 MHz to 40 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMR50 Signal Generator, 10 MHz to 50 GHz 
        
Features:
• Standard version: CW generator with pulse modulation and digital frequency sweep
• Easily upgradeable to AM/FM signal generator and synthesized sweep generator with analog ramp sweep owing to flexible options concept
• Optional pulse generator for radar and EMC applications
• Optional IF input for upconversion of digitally modulated IF signals
• Compact, lightweight, user-friendly: ideal in the lab and for field applications
• 3-year calibration cycle 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMR50 Signal Generator, 10 MHz to 50 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMR60 Signal Generator, 10 MHz to 60 GHz
        
Features:
• Standard version: CW generator with pulse modulation and digital frequency sweep
• Easily upgradeable to AM/FM signal generator and synthesized sweep generator with analog ramp sweep owing to flexible options concept
• Optional pulse generator for radar and EMC applications
• Optional IF input for upconversion of digitally modulated IF signals
• Compact, lightweight, user-friendly: ideal in the lab and for field applications
• 3-year calibration cycle 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMR60 Signal Generator, 10 MHz to 60 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMT02 Signal Generator, 5 kHz to 1.5 GHz
        
Signal Generator R&S® SMT covers the complete range of conventional analog receiver measurements. It provides high signal quality, as well as outstanding level accuracy, a wide variety of modulation and signal generation modes, customized configuration, and great ease of operation. Features such as programmable RF, LF and level sweeps as well as the correction of external frequency response make the SMT an ideal source for EMS measurements.

•Frequency Ranges:
 -R&S SMT02: 5 kHz to 1.5 GHz
•Ideal EMS signal source with specified frequency range from 5 kHz
•AM, FM, φM, pulse modulation
•FM DC with high carrier frequency accuracy
•Broadband FM from DC to 8 MHz, broadband φM from DC to 2 MHz
•Convenient RF/LF/level sweep
•Programmable level correction (compensation of external frequency response)
•VOR/ILS generator (option SM-B6)
 -phase resolution 0.01°
 -DDM resolution 0.0001
•Stereo generator (option SM-B6) for measurements on FM sound broadcast transmitters and receivers
•Minimum RF leakage due to special shielding measures
•Large, backlit LCD for clear display of all relevant settings
•Calibration interval of three years

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMT02 Signal Generator, 5 kHz to 1.5 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMT03 Signal Generator, 5 kHz to 3 GHz
        
Signal Generator R&S® SMT covers the complete range of conventional analog receiver measurements. It provides high signal quality, as well as outstanding level accuracy, a wide variety of modulation and signal generation modes, customized configuration, and great ease of operation. Features such as programmable RF, LF and level sweeps as well as the correction of external frequency response make the SMT an ideal source for EMS measurements.

•Frequency Ranges:
 -R&S SMT02: 5 kHz to 3 GHz
•Ideal EMS signal source with specified frequency range from 5 kHz
•AM, FM, φM, pulse modulation
•FM DC with high carrier frequency accuracy
•Broadband FM from DC to 8 MHz, broadband φM from DC to 2 MHz
•Convenient RF/LF/level sweep
•Programmable level correction (compensation of external frequency response)
•VOR/ILS generator (option SM-B6)
 -phase resolution 0.01°
 -DDM resolution 0.0001
•Stereo generator (option SM-B6) for measurements on FM sound broadcast transmitters and receivers
•Minimum RF leakage due to special shielding measures
•Large, backlit LCD for clear display of all relevant settings
•Calibration interval of three years

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMT03 Signal Generator, 5 kHz to 3 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMU200A Signal Generator, 100 kHz to 6 GHz      

The R&S®SMU200A has been designed to meet all requirements encountered in research and development of modern communication systems as well as in their production. The R&S®SMU200A Vector Signal Generator not only combines up to two independent signal generators in one cabinet of only four height units, it also offers unrivalled RF and baseband characteristics.

The R&S®SMU200A can be fitted with a wide range of options – for example, options for all of today's important digital standards as well as function and performance enhancements such as MIMO fading or phase coherence. For a list of all available options as well as links to detailed information about the individual options, see "ordering information".

Two signal generators in one
•Frequency options from 100 kHz to 2.2/3/4/6 GHz for the first RF path
•Optional second RF path up to 2.2 GHz or 3 GHz
•Up to two complete baseband paths
•Lossless combination of baseband signals in the digital domain (e.g. for testing multistandard base stations)

Outstanding signal quality
•I/Q modulator with 200 MHz RF bandwidth
•Very low SSB phase noise of typ. -135 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth), typ. -139 dBc with the enhanced phase noise performance option
•Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
•Excellent ACLR of typically +70 dB for 3GPP FDD
•Very high level repeatability of 0.05 dB
•High output power up to +19 dBm (PEP), overrange + 26 dBm
•High-stability reference oscillator as standard

Ideal for production
•Very short frequency and level setting times (<2 ms); only 450 µs in List mode
•Electronic attenuator up to 6 GHz over the full level range
•Flexible high speed measurements with RF List mode and multisegment waveforms
•Minimum space required as two complete generators are accommodated in one instrument of only four height units

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMU200A Signal Generator, 100 kHz to 6 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMV03 Vector Signal Generator, 9 kHz to 3.3 GHz

The Vector Signal Generator SMV03 is based on the successful analog Signal Generator R&S SML03 and features the same excellent technical characteristics. It comprises an additional broadband I/Q modulator that is able to generate any digital signal in conjunction with an external I/Q source. The SMV03 is, therefore, a way of entering the wide field of automatic test systems as well as gaining access to applications such as R&D and service. When used together with the R&S AMIQ and R&S WinIQSIM™,the R&S SMV03 can generate digital signals that meet any requirement.

Features:
• Frequency range 9 kHz to 3.3 GHz
• I/Q modulator (100 MHz RF bandwidth) with excellent vector accuracy (f > 500 MHz to 3 GHz)
• SSB phase noise –128 dBc (1 Hz)
• Setting times <10 ms
• High level accuracy <0.5 dB
• High reliability through electronic attenuator
• Digital frequency and level sweep
• AM/FM/ΦM
• Optional pulse modulator with integrated pulse generator
• Optional stereo coder with analog and digital audio inputs
• Three-year calibration cycle

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMV03 Vector Signal Generator, 9 kHz to 3.3 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMY01 Signal Generator, 9 kHz to 1040 MHz

Signal generators of the SMY family from Rohde&Schwarz are cost-effective instruments for testing AM, FM and jM receivers as well as for component measurements.
Two models are available: SMY01 with a frequency range from 9 kHz to 1040 MHz and SMY02 from 9 kHz to 2080 MHz.
Designed exclusively for the main applications of signal generators by cutting out the unnecessaries, SMY features an outstanding price/performance ratio. Thanks to its comprehensive basic features and excellent signal characteristics, it is an economical solution for universal use in lab, production and servicing environments.        

Features:
• Frequency resolution 1 Hz
• Level range -140 to +19 dBm, overrange up to 25 dBm (option)
• Level accuracy better than 1 dB
• SSB phase noise <-114 dBc at 1 GHz, Df = 20 kHz
• AM, FM, jM and pulse modulation
• Modulation generator 1 Hz to 500 kHz
• Sweep capabilities
• Nonvolatile memory for 100 complete front-panel setups
• RF overload protection 30 W (SMY01) or 50 W (SMY02)
• Low RF leakage (<0.1 mV)
• Calibration at 3-year interval

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMY01 Signal Generator, 9 kHz to 1040 MHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMR30 Signal Generator, 10 MHz to 30 GHz 
        
Features:
• Standard version: CW generator with pulse modulation and digital frequency sweep
• Easily upgradeable to AM/FM signal generator and synthesized sweep generator with analog ramp sweep owing to flexible options concept
• Optional pulse generator for radar and EMC applications
• Optional IF input for upconversion of digitally modulated IF signals
• Compact, lightweight, user-friendly: ideal in the lab and for field applications
• 3-year calibration cycle 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMR30 Signal Generator, 10 MHz to 30 GHz, please click on the "Request Quote" button below.

Agilent E4421B ESG-A analog series RF signal generator, 3 GHz

Standard Agilent Technologies ESG family RF signal generators incorporate a broad array of capabilities for testing both analog and digital communications systems. Adding flexible options provides a test solution that will evaluate the performance of a communication system to the requirements of nearly all current and proposed air interface standards. Many test functions can be customized to meet the needs of proprietary and other nonstandard wireless protocols as well. You can configure your instrument to address a wide variety of tests—from altering nearly every aspect of a digital signal or signal operating environment, to creating experimental signals. This flexibility, along with an architecture that accepts future enhancements makes the ESG family an excellent choice for wireless communications system testing now and in the future.

Features:
• Flexible architecture, upgrade paths for options
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and Phase Modulation, AM and Pulse Modulation
• Step sweep (frequency, power and list)
• Built-in function generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4421B ESG-A analog series RF signal generator, 3 GHz, please click on the "Request Quote" button below.

Agilent E8257D PSG Analog Signal Generator, up to 67 GHz  

Industry's best performance up to 67 GHz
The E8257D PSG analog signal generator delivers industry-leading output power, level accuracy, and phase noise performance up to 67 GHz (operational to 70 GHz). The PSG analog signal generator's high output power and superior level accuracy often eliminates the need of an external amplifier for testing high power devices and minimizes test uncertainty to identify errors early in the design process. The world-class phase noise performance (typically -116 dBc/Hz @ 10 GHz carrier and 10 kHz offset) is ideal for local oscillator, low jitter clock substitution and adjacent channel selectivity tests. When testing advanced RF & microwave radar, communications, and control systems, the PSG analog signal generator delivers the performance you demand.

Modular microwave signal generator platform – optionally add AM, FM, ØM, and/or pulse
Generate continuous wave (CW) signals for LO substitution or swept stimulus response analysis.  Optionally add AM, FM, ØM and/or pulse modulation to accurately characterize RF and microwave components and devices.  Many performance enhancement options are also available to configure the signal generator to meet your specific test requirements.  Tailor the PSG for today's RF and microwave test applications and easily upgrade in the future as your needs change.

Signal Characteristics
• 250 kHz to 20, 31.8, 40, 50 or 67 GHz, operational to 70 GHz (.001 Hz resolution), and 10 MHz to 20 GHz (Option 521 only)
• Extendable to 75, 90, 110, 140, 170, 220, or 325 GHz - Millimeter-wave source modules
• +23 dBm @ 20 GHz, +17dBm @ 40 GHz, +14 dBm @ 67 GHz output power (typ); > +30 dBm (typ) with Option 521
• Industry’s best SSB phase noise - Option UNX
Modulation
• AM, FM, ØM, pulse, and scan
• 8 ns rise/fall times and 20 ns pulse width (typ)
• Dual internal function generators: sine, square, triangular, ramp, and noise
Sweep
• Step, list, and ramp sweep (frequency and power)
• Source control using PSA Series spectrum analyzer
• Agilent 8757D scalar network analyzer code compatible
Automation and Communication Interface
• 10BaseT LAN and GPIB
• SCPI and IVI-COM drivers
• Backwards compatible with all PSG signal generators
 
Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8257D PSG Analog Signal Generator, up to 67 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SME02 Signal Generator, 5 kHz to 1.5 GHz  

For digital communication with all types of modulation of mobile radio
The SME supplies the complex signals required for the development and testing of digital mobile radio receivers. It is capable of generating all signals used in the main digital radio networks in line with relevant standards regarding the type of modulation, data format, TDMA structure and frequency hop patterns. The SME is completely at home also in the analog signal world of conventional signal generators. SME02, SME03 and SME06 are identical except for the frequency range. Economy Signal Generator SME03E has been designed as an especially economical solution for applications involving digitally modulated signals. The large variety of options available allows the SME to be tailored to the specific needs of the user.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SME02 Signal Generator, 5 kHz to 1.5 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SME06 Signal Generator, 5 kHz to 6 GHz  
        
The SME supplies the complex signals required for the development and testing of digital mobile radio receivers. It is capable of generating all signals used in the main digital radio networks in line with relevant standards regarding the type of modulation, data format, TDMA structure and frequency hop patterns. The SME is completely at home also in the analog signal world of conventional signal generators.

Features:
• User-programmable data sequences and TDMA structure
• RF, LF and level sweep
• Ultra-low RF leakage for measurements on highly sensitive pagers
• List mode: programmable measurement sequence for up to 4096 frequency and level combinations, setting time <0.5 ms (not SME03E)

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SME06 Signal Generator, 5 kHz to 6 GHz, please click on the "Request Quote" button.

Agilent 8673D Signal Generator, 0.05 GHz to 26 GHz      

The Agilent 8673D synthesized signal generator is a full-performance synthesizer designed to generate precise microwave signals over the 50 MHz to 26.5 GHz frequency range.
This generator offers calibrated and leveled power, AM, FM, pulse modulation, digital sweep, programmability, and frequency extension capability to 110 GHz.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8673D Signal Generator, 0.05 GHz to 26 GHz, please click on the "Request Quote" button below.

Agilent E4437B ESG-DP digital series RF signal generator, 4 GHz

Standard Agilent Technologies ESG family RF signal generators incorporate a broad array of capabilities for testing both analog and digital communications systems. Adding flexible options provides a test solution that will evaluate the performance of a communication system to the requirements of nearly all current and proposed air interface standards. Many test functions can be customized to meet the needs of proprietary and other nonstandard wireless protocols as well. You can configure your instrument to address a wide variety of tests—from altering nearly every aspect of a digital signal or signal operating environment, to creating experimental signals. This flexibility, along with an architecture that accepts future enhancements makes the ESG family an excellent choice for wireless communications system testing now and in the future.

Features:
• 250 kHz to 4 GHz frequency range with enhanced phase noise performance
• RF modulation bandwidth up to 35 MHz
• Optional dual arbitrary waveform generator and/or real-time I/Q baseband generator
• 40 MHz sample rate and 14-bit I/Q resolution
• 1 Msample (4 MB) memory for waveform playback and 1 Msample (4 MB) memory for waveform storage
• Custom digital modulation (>15 variations of FSK, MSK, PSK, and QAM),AM, FM, phase modulation, pulse modulation, and step/list sweep (frequency and power)
• E443xB ESG Customer Installable Upgrades

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4437B ESG-DP digital series RF signal generator, 4 GHz, please click on the "Request Quote" button below.

Fluke 54200 Multi-standard Video & TV Signal Generator

Meet the 54000 Series from Fluke, a range of easy to use instruments to test TVs, VCRs, set top boxes and other video equipment. According to any video standard. And with today’s widest choice of highly accurate signals.

Two models
There are two compact models in the series. The Fluke 54100 Video Signal Generator is the obvious choice for testing video circuitry. The Fluke 54200 TV Signal Generator offers additional sound test signals and a highly stable RF output, making it ideal for complete testing of TV sets, VCRs or other related equipment. Both models offer selectable TV standards (PAL, NTSC, SECAM), text functions and a choice of signal outputs. You can choose from a number of readily available pre-configurations, or select an instrument that precisely matches your testing requirements, specifying options from a range of stereo sound, data services and interface functions. You’ll find all details on the separate option and ordering information inserts.

All applications
The digitally generated test signals of the Fluke 54000 Series comply with the recommendations of the CCIR, EBU, FCC, ITU and EIA standards for analog television. This versatility, combined with the high signal quality (stability and purity) makes them ideal for testing TV receivers, VCRs, camcorders, observation systems and set-top decoder boxes, and also for checking the performance of individual sub-assemblies or components used in these products.

Easy to Use
These generators are excellent examples of Fluke’s reputation for easy-to-use instruments:
• Select the main functions directly on the front-panel keyboard. More advanced functions can be accessed using soft keys and the large LCD (Liquid Crystal Display) with its familiar graphical interface.
• Accurately set luminance and chrominance amplitudes with the up and down keys or the numerical keyboard.
• Store up to 99 different test situation settings for later instantaneous recall.
• Finally, to make it even more convenient, a number of country specific settings have been pre-programmed. Just think of the time this will save you.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 54200 Multi-standard Video & TV Signal Generator, please click on the "Request Quote" button below.

Agilent 8640A Signal Generator     

Features:
• Wide Frequency and power range
• Low broadband and close-in noise
• Calibrated, metered AM and FM
• External Counter to 550 MHz
• Internal pushbutton synchronizer

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8663B Analog Signal Generator, please click on the "Request Quote" button below.

Agilent E4438C ESG Vector Signal Generator, 6 GHz

RF performance and leading-edge baseband generation
Agilent's E4438C ESG vector signal generator combines outstanding RF performance and sophisticated baseband generation to deliver calibrated test signals at baseband, IF, and RF frequencies up to 6 GHz. Offering an internal baseband generator with arbitrary waveform and real-time I/Q capabilities, ample waveform playback and storage memory, and a wide RF modulation bandwidth, the E4438C ESG is equipped to test today's complex wireless systems and their components.

Modular architecture to meet your test requirements
The E4438C ESG is an adaptable platform with optional capabilities to customize the instrument for baseband and RF test applications ranging from simple distortion test and general purpose troubleshooting to baseband coding algorithm development, advanced transceiver design verification, and high volume manufacturing. Its modular architecture makes it easy to configure the instrument with the level of performance and signal creation capability you need today with the option to upgrade in the future.

Features:
Signal Characteristics
• 250 kHz to 1, 2, 3,4, or 6 GHz (.01 Hz resolution)
• +17 dBm output power
• 160 MHz RF modulation bandwidth
Modulation and Sweep
• AM, FM, ØM, and pulse
• ASK, FSK, MSK, PSK, QAM, custom I/Q
• Step, or list, frequency and power
Baseband Generation and Signal Creation
• Internal baseband generator (80 MHz RF BW): arbitrary waveform and real-time I/Q
• 64 MSa playback memory and 1 GSa storage
• Create reference signals: WLAN, WiMAX™, W-CDMA, cdma2000™, GSM, DVB, multitone
• Digital I/O, fading, and PC waveform streaming
Automation and Communication Interface
• 10BaseT LAN and GPIB
• SCPI and IVI-COM drivers
• Backwards compatible with all ESG signal generators

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4438C ESG Vector Signal Generator, 6 GHz, please click on the "Request Quote" button below.

Agilent E4422B ESG-A analog series RF signal generator, 4 GHz

Standard Agilent Technologies ESG family RF signal generators incorporate a broad array of capabilities for testing both analog and digital communications systems. Adding flexible options provides a test solution that will evaluate the performance of a communication system to the requirements of nearly all current and proposed air interface standards. Many test functions can be customized to meet the needs of proprietary and other nonstandard wireless protocols as well. You can configure your instrument to address a wide variety of tests—from altering nearly every aspect of a digital signal or signal operating environment, to creating experimental signals. This flexibility, along with an architecture that accepts future enhancements makes the ESG family an excellent choice for wireless communications system testing now and in the future.

Features:
• Flexible architecture, upgrade paths for options
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and Phase Modulation, AM and Pulse Modulation
• Step sweep (frequency, power and list)
• Built-in function generator 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4422B ESG-A analog series RF signal generator, 4 GHz, please click on the "Request Quote" button below.

Agilent E4425B ESG-AP Series Analog RF Signal Generator, 3 GHz

The Agilent E4425B RF Signal Generator provides outstanding phase-noise performance and analog modulation features for all general-purpose test needs. It offers excellent performance with superior quality, reliability and worldwide support -- at an affordable price. The E4425B provides comprehensive analog modulation capabilities, including AM, FM, phase modulation and pulse modulation. It is ideally suited to meet the demanding requirements of today's receiver test, component test and local oscillator application.

• High spectral purity
• Flexible architecture, upgrade paths for options
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and Phase Modulation, AM and Pulse Modulation
• Step sweep (frequency, power and list)
• Built-in function generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4425B ESG-AP Series Analog RF Signal Generator, 3 GHz, please click on the "Request Quote" button below.

Agilent E4428C ESG analog signal generator , to 6 GHz

Excellent all-inclusive RF and analog modulation performance up to 3 or 6 GHz
The E4428C ESG analog signal generator delivers outstanding spectral purity, level accuracy, output power, and analog modulation performance up to 3 or 6 GHz for all general-purpose test needs. This makes the E4428C ESG a superb choice for general-purpose tests requiring CW, AM, ØM, and FM receiver and component test signals in the cellular, ISM, and UNII frequency bands.

Lowest Single-Sideband phase noise performance in its price class
Single-Sideband (SSB) phase noise is an extremely important specification of a signal generator. For example, if used for measuring the adjacent channel selectivity of a receiver, your test results might indicate a failure when your receiver is actually functioning properly if the phase noise of the signal generator is too high. With a typical SSB phase noise performance of -134 dBc/Hz at 20 kHz offset from a 1 GHz carrier, the E4428C ESG will meet your demanding performance needs. Other key applications that require high spectral purity include LO substitution, low-jitter clock stimulus, blocking/interference signals, and in-channel measurements close to the carrier.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4428C ESG analog signal generator , to 6 GHz, please click on the "Request Quote" button below.

Agilent E8241A PSG-L Series Performance Signal Generator, 20 GHz

The Agilent Performance Signal Generator series offers accurate characterization of products and eliminates the need of an external amplifier for testing high power devices. The PSG series provides 20 dBm at 20 GHz (option 1EA) reducing overall equipment and test costs. The superior level accuracy of the PSG series (+/- 0.7 dB) reduces test uncertainties and improves production throughput. Standard products have phase noise performance of -85 dBc/Hz at 1khz offset and -110 dBc/Hz at 20 kHz offset and a 10 GHz carrier. The PSG provides improved performance with option UNJ of -98 dBc/Hz at 1 kHz offset and -110 dBc/Hz at 10 kHz offset and a 10 GHz carrier. The new PSG series guarantees accurate evaluation of devices, errors can be pinpointed early on in the design process thus resulting in a reduced development time.

• Widest frequency range (250 kHz to 20 GHz) with 0.01 Hz frequency resolution - standard
• Highest power available (+13/+20) at 20 GHz with excellent level accuracy (0.7 and 0.9 dB)
• SSB phase noise is -110 dBc/Hz at 20kHz offset at 10 GHz carrier
• Optional SSB phase noise is -98 dBc/Hz at 1 kHz offset at 10 GHz carrier
• Digital Sweep functions (list and step) with capability of calibrating every point at the test port using the user flatness correction
• Easy frequency extension to 110 GHz using the 83550 series Millimeter-Wave Source Modules

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8241A PSG-L Series Performance Signal Generator, 20 GHz, please click on the "Request Quote" button below.

Agilent E8251A PSG-A Series Performance Signal Generator, 20 GHz

The Agilent Performance Signal Generator series offers accurate characterization of products and eliminates the need of an external amplifier for testing high power devices. The PSG series provides 20 dBm at 20 GHz (option 1EA), reducing overall equipment and test costs. The superior level accuracy of the PSG series (+/- 0.7 dB) reduces test uncertainties and improves production throughput. Standard products have phase noise performance of -85 dBc/Hz at 1 kHz offset and -110 dBc/Hz at 20 kHz offset and a 10 GHz carrier. The PSG provides improved performance with option UNJ of -98 dBc/Hz at 1 kHz offset and -110 dBc/Hz at 10 kHz offset and a 10 GHz carrier. Because the new PSG series guarantees accurate evaluation of devices, errors can be pinpointed early on in the design process thus resulting in a reduced development time.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8251A PSG-A Series Performance Signal Generator, 20 GHz, please click on the "Request Quote" button below.

Agilent E8257C PSG Analog signal generator, to 40 GHz

Low phase noise, high power, and analog modulation
Providing premium performance at an affordable price, the E8257C PSG analog signal generator delivers industry-leading output power, superior level accuracy, low phase noise, and precision analog modulation for accurate characterization of RF and microwave components and devices. It typically eliminates the need of an external amplifier for testing high power devices and minimizes test uncertainty to identify errors early in the design process and reduce development time. The PSG sets a new price performance mark by providing advanced capabilities; including narrow pulses for radar test applications and ramp sweep for continuous sweep measurements and fully automated use with the Agilent 8757D scalar network analyzer.

Modular architecture to meet your test requirements
Customize the PSG for RF and microwave test applications ranging from LO substitution and simple distortion test to general-purpose troubleshooting and transceiver design verification. A variety of optional performance enhancements and accessories are available. Its modular architecture makes it easy to configure the PSG to address your specific test application, providing the level of performance you need today and the option to upgrade in the future.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8257C PSG Analog signal generator, to 40 GHz, please click on the "Request Quote" button below.

Agilent E8267C PSG Vector signal generator, to 20 GHz 

Our most advanced microwave signal generator
Agilent's new E8267C PSG vector signal generator is the industry's first integrated microwave vector signal generator with direct I/Q modulation up to 20 GHz. It features a built-in wideband I/Q modulator that delivers up to 1 GHz RF modulation bandwidth and an advanced wideband (80 MHz) internal baseband generator capable of flexible arbitrary waveform playback and sophisticated real-time signal generation. Clearly this groundbreaking integrated functionality, only available in the E8267C PSG, drastically simplifies the generation of complex vector modulated signals for design and manufacturing test applications in aerospace, defense, satellite communications, and broadband wireless. Just imagine, convenient access to the most complete set of calibrated wideband test stimuli ranging from digital and analog baseband to RF and microwave carrier frequencies.

Modular architecture to meet your test requirements
Customize the PSG for baseband, RF, and microwave test applications ranging from simple distortion test and general purpose troubleshooting to baseband coding algorithm development and advanced digital microwave transceiver design verification. A variety of optional performance enhancements and accessories are available and complemented by a comprehensive suite of signal creation software. Its modular architecture makes it easy to configure the PSG to meet your specific test requirements, providing the level of performance and signal creation capability you need today and the option to upgrade in the future.

• Frequency range 250 kHz to 20 GHz with .001 Hz resolution
• Output power range +17 to -130 dBm with superior level accuracy
• Industry-leading phase noise performance
• 160 MHz (standard) RF modulation bandwidth extendable up to 1 GHz
• Flexible FSK, MSK, PSK, QAM, custom I/Q, AM, FM, ØM, and pulse
• Step, list, & ramp sweep frequency and power
• Internal baseband generator (80 MHz RF BW)
• Arbitrary I/Q waveform playback (up to 100 MSa/s)
• 64MSa playback memory and up to 1 GSa storage
• Real-time I/Q symbol generation (up to 50 Msym/s)
• Generate radar test signals, 802.11 WLAN, multitone, noise power ratio, custom modulation, and more
• Remote control over 10BaseT LAN and GPIB
• SCPI and IVI-COM drivers
 
Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8267C PSG Vector signal generator, to 20 GHz, please click on the "Request Quote" button below.

Agilent E8267D PSG Vector Signal Generator, to 44 GHz 

Most advanced microwave signal generator
Agilent's E8267D PSG vector signal generator is the industry's first integrated microwave vector signal generator with I/Q modulation up to 44 GHz. It features an advanced wideband internal baseband generator capable of flexible arbitrary waveform playback or sophisticated real-time signal generation. The E8267D PSG also has a built-in wideband I/Q modulator that delivers up to 2 GHz RF modulation bandwidth and is a perfect complement to Agilent's N6030A stand-alone wideband arbitrary waveform generator for I/Q waveform simulations up to 1 GHz RF bandwidth. This groundbreaking integrated vector functionality, only available in the E8267D PSG, drastically simplifies the generation of complex modulated signals for design and manufacturing test applications in aerospace, defense, satellite communications, and broadband wireless.

Customize the PSG to meet your needs
Completely tailor the PSG for today's RF and microwave test application while easily upgrading in the future as requirements change. Choose from a variety of optional enhancements to configure the E8267D PSG for applications ranging from distortion test to baseband coding algorithm development and advanced digital microwave transceiver design verification.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8267D PSG Vector Signal Generator, to 44 GHz, please click on the "Request Quote" button below.

Agilent 8665B Signal Generator, 6 GHz 

The Agilent 8665B signal generator is suited for basic receiver testing up to 6 GHz. With Option 004 (low-noise enhancement), it can be used for out-of-channel receiver testing or as a clock source where having the lowest phase jitter is important. Radar testing can be done by adding Option 008 (pulse modulation) . Pulse width and delay can be internally adjusted between 50 ns and 999 ns, eliminating the need for an external pulse generator. Standard FM rates of up to 2 MHz and deviations to 20 MHz are suitable for many applications such as high-speed digital communications. The internal modulation source generates sine, square, triangle or sawtooth waveforms. For applications demanding the lowest RF leakage, Option 010 provides increased RF shielding.

• <-140 dBc/Hz typical SSB phase noise at 20 kHz offset at 1 GHz with Option 004
• <-100 dBc nonharmonic spurious to 2 GHz reduces error when testing spurious immunity of receivers
• AM, FM, and optional pulse modulation
• 0.01 Hz frequency resolution
 
Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8665B Signal Generator, 6 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMT06 Signal Generator, 5 kHz to 6 GHz 
        
Signal Generator R&S® SMT covers the complete range of conventional analog receiver measurements. It provides high signal quality, as well as outstanding level accuracy, a wide variety of modulation and signal generation modes, customized configuration, and great ease of operation. Features such as programmable RF, LF and level sweeps as well as the correction of external frequency response make the SMT an ideal source for EMS measurements.

•Frequency Ranges:
 -R&S SMT02: 5 kHz to 6 GHz
•Ideal EMS signal source with specified frequency range from 5 kHz
•AM, FM, φM, pulse modulation
•FM DC with high carrier frequency accuracy
•Broadband FM from DC to 8 MHz, broadband φM from DC to 2 MHz
•Convenient RF/LF/level sweep
•Programmable level correction (compensation of external frequency response)
•VOR/ILS generator (option SM-B6)
 -phase resolution 0.01°
 -DDM resolution 0.0001
•Stereo generator (option SM-B6) for measurements on FM sound broadcast transmitters and receivers
•Minimum RF leakage due to special shielding measures
•Large, backlit LCD for clear display of all relevant settings
•Calibration interval of three years

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMT06 Signal Generator, 5 kHz to 6 GHz, please click on the "Request Quote" button below.

Anritsu MG3692B RF/Microwave Signal Generator, 2 GHz to 20 GHz

The MG3690B series of broadband signal generators covers both RF and microwave frequencies from 0.1 Hz to 70 GHz. For mmW frequencies, the MG3690B’s coverage can be extended up to 325 GHz or beyond, with external multipliers. Thus, the MG3690B series is an ideal signal source for both RF and microwave requirements, fully configurable from simple to high performance applications.

The MG3690B microwave signal generator series also offers the highest output power, best-in-class spectral purity, and fastest switching speed. For example, the MG3692B can provide guaranteed +23 dBm at 20 GHz with -94 dBc/Hz phase noise at 1 kHz offset while typically switching at 5 ms per point! This level of performance eliminates the need for external amplification, enables the verification the toughest spectral purity requirements, and greatly reduces test times. If 5 ms per point is not fast enough then switch to the optional analog ramp sweep for even faster measurements.

The MG3690B also offers a full suite of modulation capabilities for signal simulations from simple to the most complex. These modulation options include Amplitude (AM), Frequency (FM), Phase (ØM), and Pulse (PM).  The MG3690B can be configured to perform these modulations simultaneously via either internal or external waveform generators. For IQ modulation, the IF input option allows the easy up-conversion of an externally IQ-modulated RF signal.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu MG3692B RF/Microwave Signal Generator, 2 GHz to 20 GHz, please click on the "Request Quote" button below.

Tektronix SPG300 Video Signal Generator

The SPG600 and SPG300 Sync Pulse Generators provide synchronization and test signals for both traditional analog and mixed digital and analog facilities, in both NTSC/525 and PAL/625 environments. These products are ideal as a stable master sync signal, which is critical in digital broadcast environments. When the SPG600/SPG300 is configured for Stay GenLockTM mode, a momentary loss of synchronization at the genlock reference input will not cause a disturbance in the units test signal and black outputs. When the genlock signal is reapplied, the SPG system will gradually re-acquire lock, causing little disruption in the outputs of the device, and will not cause any noticeable glitches in the outputs of the SPG. The GEN lock source can be NTSC/PAL Black Burst, NTSC/PAL Sync or CW. When using CW lock, the GEN lock timing can be adjusted on all the NTSC or PAL color frames.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix SPG300 Video Signal Generator, please click on the "Request Quote" button below.

Tektronix TSG 95 PAL/NTSC Signal Generator 

PAL:
• 75% Bars
• 100% Bars
• 75% Bars over Red 
• 100% Bars over Red
• Green Field 
• Blue Field 
• Red Field
• 100% Flat Field 
• 50% Flat Field 
• 0% Flat Field
• Multiburst
• 60% Reduced Line Sweep
• Bounce
• 5 Step (Grey Scale)
• Modulated 5 Step
• Convergence
• Plug
• Matrix
• Field Square Wave
• safe Area

NTSC:
• SMPTE Bars
• 75% Bars
• Multiburst
• NTC7 Composite
• NTC7 Combination
• FCC Composite
• 5 Steo (Grey scale)
• Red Field
• Field Square Wave
• 50 IRE Flat Field
• 0 IRE no Burst
• Black Burst
• (Sin x)/x
• Convergence
• Matrix
• Safe Area

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix TSG 95 PAL/NTSC Signal Generator, please click on the "Request Quote" button below.

Rohde & Schwarz SME03 RF Signal Generator, 5 kHz to 3 GHz   
        
The SME supplies the complex signals required for the development and testing of digital mobile radio receivers. It is capable of generating all signals used in the main digital radio networks in line with relevant standards regarding the type of modulation, data format, TDMA structure and frequency hop patterns. The SME is completely at home also in the analog signal world of conventional signal generators.

Features:
• User-programmable data sequences and TDMA structure
• RF, LF and level sweep
• Ultra-low RF leakage for measurements on highly sensitive pagers
• List mode: programmable measurement sequence for up to 4096 frequency and level combinations, setting time <0.5 ms (not SME03E)

For pricing information, or to receive an official price quotation for the Rohde & Schwarz SME03 RF Signal Generator, 5 Khz to 3 GHz please click on the "Request Quote" button.

Agilent 83731B Synthesized Signal Generator, 1 GHz to 20 GHz

The Agilent 83731B synthesized signal generator sets a new standard for performance at a price that is surprisingly affordable. No longer will you have to give up frequency coverage, modulation or reliability to meet your budget. This signal source will perform beyond your expectations at a price within your reach. Fundamental oscillators and switched low-pass filters deliver <-55 dBc harmonics, eliminate subharmonics and suppress spurious to <-60 dBc. This signal source provides plenty of output power (typically >+14 dBm), while spectral purity is maintained even at high power levels (typical output power at frequencies below 1 GHz is +20 dBm).

• Pulse modulation for testing radar and EW receivers
• Scan modulation for simulating a scanning antenna
• Frequency modulation for simulating comms data
• Phase modulation for satellite and radar applications
 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 83731B Synthesized Signal Generator, 1 GHz to 20 GHz, please click on the "Request Quote" button below.

Agilent 83732A Synthesized Signal Generator, 10 MHz to 20 GHz

The Agilent 83732A synthesized signal generator sets new standards for performance at prices that are surprisingly affordable.  No longer will you have to give up frequency coverage, modulation, or reliability to meet your budget.
The 83732A will perform beyond your expectations at a price within your reach. Test radar, electronic warfare (EW), and communication receivers with confidence from 10 MHz to 20 GHz.  Excellent spectral purity, high output power, and sophisticated modulation are combined in an affordable, lightweight, easy-to-use signal generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 83732A Synthesized Signal Generator, 10 MHz to 20 GHz, please click on the "Request Quote" button below.

Agilent E4400B RF Signal Generator, 250 kHz to 1 GHz

Features:
• Flexible architecture, upgrade paths for options
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and Phase Modulation, AM and Pulse Modulation
• Step sweep (frequency, power and list)
• Built-in function generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4400B RF Signal Generator, 250 kHz to 1 GHz, please click on the "Request Quote" button below.

Agilent E4420B ESG-A Series Analog RF Signal Generator, 2 GHz

Features:
• Flexible architecture, upgrade paths for options
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and Phase Modulation, AM and Pulse Modulation
• Step sweep (frequency, power and list)
• Built-in function generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4420B ESG-A Series Analog RF Signal Generator, 2 GHz, please click on the "Request Quote" button below.

Agilent E4423B ESG-AP Series Analog RF Signal Generator, 1 GHz

The Agilent E4423B RF Signal Generator provides outstanding phase-noise performance and analog modulation features for all general-purpose test needs. It offers excellent performance with superior quality, reliability and worldwide support -- at an affordable price. The E4423B provides comprehensive analog modulation capabilities, including AM, FM, phase modulation and pulse modulation. It is ideally suited to meet the demanding requirements of today's receiver test, component test and local oscillator application.

• High spectral purity
• Flexible architecture, upgrade paths for options
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and Phase Modulation, AM and Pulse Modulation
• Step sweep (frequency, power and list)
• Built-in function generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4423B ESG-AP Series Analog RF Signal Generator, 1 GHz, please click on the "Request Quote" button below.

Agilent E4426B ESG-AP Series Analog RF Signal Generator, 4 GHz

The Agilent E4426B RF Signal Generator provides outstanding phase-noise performance and analog modulation features for all general-purpose test needs. It offers excellent performance with superior quality, reliability and worldwide support -- at an affordable price. The Agilent E4426B provides comprehensive analog modulation capabilities, including AM, FM, phase modulation and pulse modulation. It is ideally suited to meet the demanding requirements of today's receiver test, component test and local oscillator application.

• High spectral purity
• Flexible architecture, upgrade paths for options
• Choice of electronic or mechanical attenuator
• Superior level accuracy
• Wideband FM and Phase Modulation, AM and Pulse Modulation
• Step sweep (frequency, power and list)
• Built-in function generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4426B ESG-AP Series Analog RF Signal Generator, 4 GHz, please click on the "Request Quote" button below.

Agilent E4431B ESG-D Series Digital RF Signal Generator, 2 GHz

Features:
• 250 kHz to 2 GHz frequency range
• RF modulation bandwidth up to 35 MHz
• Optional dual arbitrary waveform generator and/or real-time I/Q baseband generator
• 40 MHz sample rate and 14-bit I/Q resolution
• 1 Msample (4 MB) memory for waveform playback and 1 Msample (4 MB) memory for waveform storage
• Custom digital modulation (>15 variations of FSK, MSK, PSK, and QAM),AM, FM, phase modulation, pulse modulation, and step/list sweep (frequency and power)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4431B ESG-D Series Digital RF Signal Generator, 2 GHz, please click on the "Request Quote" button below.

Agilent E4433B ESG-D Series Digital RF Signal Generator, 4 GHz

Features:
• 250 kHz to 4 GHz frequency range
• RF modulation bandwidth up to 35 MHz
• Optional dual arbitrary waveform generator and/or real-time I/Q baseband generator
• 40 MHz sample rate and 14-bit I/Q resolution
• 1 Msample (4 MB) memory for waveform playback and 1 Msample (4 MB) memory for waveform storage
• Custom digital modulation (>15 variations of FSK, MSK, PSK, and QAM), AM, FM, phase modulation, pulse modulation, and step/list sweep (frequency and power)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4433B ESG-D Series Digital RF Signal Generator, 4 GHz,  please click on the "Request Quote" button below.

Agilent E4433A Digital RF Signal Generator, 250 kHz to 4 GHz

The Agilent E4433A digital RF signal generator provides a wide range of digital modulation capabilities, in addition to a comprehensive feature set and excellent analog performance -- all at an affordable price. The first in a new generation of signal generators, it provides excellent modulation accuracy and stability, as well as unprecedented level accuracy. It is ideally suited to meet the demanding requirements of today's digital receiver test, component test and local oscillator applications. The innovative design of the new Agilent E4433A provides a flexible architecture that can be tailored to meet the changing demands of evolving markets. Lower initial cost, high reliability and a two-year calibration cycle, all minimize the cost of ownership. The Agilent E4433A digital generator is designed for long-term dependability, which maximizes production throughput and uptime.

• 250 kHz up to 4 GHz
• Flexible, expandable architecture with upgrade path for options
• 4 GHz electronic attenuator, built-in function generator, superior level accuracy, and step sweep (frequency, power and list)
• Built-in digital modulation formats for DECT, GSM, NADC, PDC, PHS and TETRA (Option UN3/UN4)
• External analog I and Q inputs
• Versatile data generation with burst capabilities
• Wideband AM

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4433A Digital RF Signal Generator, 250 kHz to 4 GHz,  please click on the "Request Quote" button below.

Agilent E4436B ESG-DP Series Digital RF Signal Generator, 3 GHz

Features:
• 250 kHz to 3 GHz frequency range with enhanced phase noise performance
• RF modulation bandwidth up to 35 MHz
• Optional dual arbitrary waveform generator and/or real-time I/Q baseband generator
• 40 MHz sample rate and 14-bit I/Q resolution
• 1 Msample (4 MB) memory for waveform playback and 1 Msample (4 MB) memory for waveform storage
• Custom digital modulation (>15 variations of FSK, MSK, PSK, and QAM), AM, FM, phase modulation, pulse modulation, and step/list sweep (frequency and power)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4436B ESG-DP Series Digital RF Signal Generator, 3 GHz,  please click on the "Request Quote" button below.

Tektronix TSG 100 NTSC Signal Generator 

• Studio and transmission teest signal sets
• 8-Bit digital generation 
• Conforms to RS-170A timing specifications 
• 1 kHz audio tone 
• H or V rate scope trigger signal 
• DC power option 
• Compact and lightweight 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix TSG 100 NTSC Signal Generator, please click on the "Request Quote" button below.

Marconi 2018A Signal Generator, 80 kHz to 520 MHz

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2018A Signal Generator, 80 kHz to 520 MHz, please click on the "Request Quote" button below.

Marconi 2019A Signal Generator, 80 kHz to 1040 MHz

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2019A Signal Generator, 80 kHz to 1040 MHz, please click on the "Request Quote" button below.

Marconi 2022C Signal Generator, 10 kHz to 1 GHz

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2022C Signal Generator, 10 kHz to 1 GHz, please click on the "Request Quote" button below.

Marconi 2022D Signal Generator, 10 kHz to 1 GHz       

The Marconi 2022D is a light-weight synthesized signal generator having a frequency range of 10 kHz to 1 GHz and providing comprehensive amplitude, frequency and phase modulation facilities with an RF output level range of -127 dBm to +13 dBm.
The 2022D is designed to cover a wide range of RF applications in development, production and maintenance environments. Output frequency is phase locked to an internal or external frequency standard and frequencies up to 100 MHz can be set to a resolution of 10 Hz, and above that to a resolution of 100 Hz.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2022D Signal Generator, 10 kHz to 1 GHz, please click on the "Request Quote" button below.

Marconi 2023B Signal Generator, 9 kHz to 2.05 GHz

• Wide frequency coverage:- 9 kHz to 2.05 GHz (2023B)
• Excellent spectral purity
• Linear and logarithmic sweep mode
• RPP to 50 W
• Sine, triangular and square wave two tone modulation source
• RS-232 and GPIB control
• Comprehensive modulation:- AM, FM, OM , Pulse & FSK
• 3.9 kHz Bessel filtered FSK
• Optional +25 dBm RF output
• SINAD Measurement Option

The 2023A/B and 2025 signal generators are portable and lightweight, offering carrier frequencies from 9 kHz to 1.2 GHz (2023A), 9 kHz to 2.05 GHz (2023B) and 9 kHz to 2.51 GHz (2025) with a wide choice of modulation modes.
The instruments are suitable for a wide range of applications in laboratory, production, and maintenance environments.
The GPIB facility allows the unit to be included in ATE systems for faster manufacturing throughput. An RS-232 interface is provided with a command set in common with the GPIB to simplify remote control of the signal generator in basic test systems or via a modem.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2023B Signal Generator, 9 kHz to 2.05 GHz, please click on the "Request Quote" button below.

Marconi 2025 Signal Generator, 9 kHz to 2.51 GHz

• Wide frequency coverage:- 9 kHz to 2.51 GHz (2025)
• Excellent spectral purity
• Linear and logarithmic sweep mode
• RPP to 50 W
• Sine, triangular and square wave two tone modulation source
• RS-232 and GPIB control
• Comprehensive modulation:- AM, FM, OM , Pulse & FSK
• 3.9 kHz Bessel filtered FSK
• Optional +25 dBm RF output
• SINAD Measurement Option

The 2023A/B and 2025 signal generators are portable and lightweight, offering carrier frequencies from 9 kHz to 1.2 GHz (2023A), 9 kHz to 2.05 GHz (2023B) and 9 kHz to 2.51 GHz (2025) with a wide choice of modulation modes.
The instruments are suitable for a wide range of applications in laboratory, production, and maintenance environments.
The GPIB facility allows the unit to be included in ATE systems for faster manufacturing throughput. An RS-232 interface is provided with a command set in common with the GPIB to simplify remote control of the signal generator in basic test systems or via a modem.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2025 Signal Generator, 9 kHz to 2.51 GHz, please click on the "Request Quote" button below.

Marconi 2052 Digital and Vector Signal Generator, 10 kHz to 5.4 GHz

For pricing information, or to receive an official price quotation for the Marconi 2052 Digital and Vector Signal Generator, 10 kHz to 5.4 GHz, please click on the "Request Quote" button below.

Gigatronics 600 Signal Generator

For pricing information, or to receive an official price quotation for the Gigatronics 600 Signal Generator, please click on the "Request Quote" button below.

Gigatronics 605 Signal Generator

For pricing information, or to receive an official price quotation for the Gigatronics 600 Signal Generator, please click on the "Request Quote" button below.

Gigatronics 610 Signal Generator

For pricing information, or to receive an official price quotation for the Gigatronics 600 Signal Generator, please click on the "Request Quote" button below.

Gigatronics 1018 Synthesized Signal Generator

The Gigatronics Model 1018 provides several microwave generation and measurement functions which result in making the instrument a versatile microwave test set that can replace a number of instruments in many applications.
The unit is basically a 50 MHz to 18 GHz digital synthesized signal generator that provides a precise, highly stable and calibrated signal output.  Its frequency accuracy and stability are determined by a low noise reference oscillator.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 1018 Synthesized Signal Generator, please click on the "Request Quote" button below.

The Gigatronics 6061A Synthesized RF Signal Generator

THE 6061A: OUTSTANDING VALUE
The Giga-tronics 6061A Synthesized RF Signal Generator is an ideal choice for general purpose RF testing from 10 kHz to 1.05 GHz.
The 6061A is programmable from -147 to above +13 dBm with 0.1 dB resolution. And accuracy is ±1.0 dB from -127 to +13 dBm.Built-in AM and FM are provided along with a number of amplitude features, including Relative Amplitude, RF On/Off and Fixed Range.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 6061A Synthesized RF Signal Generator, please click on the "Request Quote" button below.

Gigatronics 1026 Signal Generator

For pricing information, or to receive an official price quotation for the Gigatronics 1026 Signal Generator, please click on the "Request Quote" button below.

Gigatronics GT9000 Synthesized Signal Generator

Now you can get the performance you need and the capability you want, at a price you can afford.
Both the Giga-tronics GT9000 Microwave Synthesizer and the GT 9000S Synthesized Microwave Sweeper give you better performance from 10 MHz to 20 GHz than competitive instruments costing thousands of dollars more.
This unequalled combination of high performance and low price is the result of an innovative single RF module and unique new filtering techniques.Together, these engineering breakthroughs yield higher performance, greater reliability and better serviceability. And the single module is less expensive to manufacture and test, resulting in a lower price.
So now you can get a microwave synthesizer or sweeper with outstanding performance, capability and reliability at an incredibly low price.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics GT9000 Synthesized Signal Generator, please click on the "Request Quote" button below.

Wavetek 3001 Signal Generator, 1 to 520 MHz

Features:
• Broad Frequency range
• Phase Locked Over Entire Range
• Programmable Frequency and RD Level
• GPIB Compatible
• Simplified Operation

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Wavetek 3001 Signal Generator, 1 to 520 MHz, please click on the "Request Quote" button below.

Wavetek 3002 Signal Generator, 1 kHz to 520 MHz

Features:
• Broad Frequency range
• Phase Locked Over Entire Range
• Programmable Frequency and RD Level
• GPIB Compatible
• Simplified Operation

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Wavetek 3002 Signal Generator, 1 kHz to 520 MHz, please click on the "Request Quote" button below.

Protek B1240 Synthesized AM/FM Signal Generator     

Features:
• 10 KHz to 1040KHz frequency range
• AM, PM and FM modulation
• -127dBm to +6dBm output level
• Self Test and Calibration capabilities
• 25W reverse power protection
• 100 location memory for storing Frequency, modulation and output level data
• Optional GPIB interface

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Protek B1240 Synthesized AM/FM Signal Generator , please click on the "Request Quote" button below.

Quantum Data 801GF Portable Video Signal Generator     

For pricing information, or to receive an official price quotation for the Quantum Data 801GF Portable Video Signal Generator, please click on the "Request Quote" button.

Agilent 8660C Synthesized Signal Generator

The Agilent 8660 is a modular solid-state plug-in system.  Each system includes: 1) a programmable synthesized signal generator mainframe, 2) an RF section plug-in, and 3) a modulation section.  Synthesized accuracy and stability along with complete programmability make the Agilent 8660 ideal for most automated receiver and component testing situations.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8660C Synthesized Signal Generator, please click on the "Request Quote" button below.

Tektronix SPG600 Video Signal Generator 

The SPG600 and SPG300 Sync Pulse Generators provide synchronization and test signals for both traditional analog and mixed digital and analog facilities, in both NTSC/525 and PAL/625 environments. These products are ideal as a stable master sync signal, which is critical in digital broadcast environments. When the SPG600/SPG300 is configured for Stay GenLockTM mode, a momentary loss of synchronization at the genlock reference input will not cause a disturbance in the units test signal and black outputs. When the genlock signal is reapplied, the SPG system will gradually re-acquire lock, causing little disruption in the outputs of the device, and will not cause any noticeable glitches in the outputs of the SPG. The GEN lock source can be NTSC/PAL Black Burst, NTSC/PAL Sync or CW. When using CW lock, the GEN lock timing can be adjusted on all the NTSC or PAL color frames.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix SPG600 Video Signal Generator, please click on the "Request Quote" button below.

Agilent N9310A RF Signal Generator, 9 kHz to 3 GHz

The N9310A is ideal for electronic manufacturing test for modern consumer products like cordless phones, digital radios, GPC modules, RFIDs and wireless LAN devices. It is the first in this new entry-level of RF basic instruments. It comes with all the capability and reliability you need – at a price you always wanted.

The signal generator is easy to operate. It generates common RF signals from 9kHz up to 3 GHz. With the built-in analog modulation capabilities, it can generate modulated AM, FM, QM and pulse signal easily. Adding optional analog Iq input capability; it can generate complex IQ modulated signals such as GSM, cdma and OFDM signals from custom IQ inputs.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N9310A RF Signal Generator, 9 kHz to 3 GHz, please click on the "Request Quote" button below.

Agilent 8684B Microwave Signal Generator

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8684B Microwave Signal Generator, please click on the "Request Quote" button below.

Agilent 8648A Synthesized Signal Generator, 9 kHz to 1 GHz  Technical Specifications

Receiver testing has reached a new level of affordability. Ideal for in-channel receiver testing, Agilent Technologies’ additions to the economy line of RF signal generators offer improved performance at affordable prices. The 8648A/B/C/D provide 1, 2, 3.2 and 4 GHz coverage, respectively, with a simple user interface and the quality and reliability you expect from Agilent Technologies products.

Sensitivity measurements are easy to perform with the economy signal generator’s wide dynamic range. Covering the operating range of even the most sensitive receivers, the 8648A offers +10 to –136 dBm, while the 8648B/C/D provide +13 to –136 dBm output power levels. With ±1 dB level accuracy to –127 dBm below 1GHz, you can be assured of accurate repeatable measurements every time. Determine receiver sensitivity in seconds by scrolling through required test levels. With independent amplitude and frequency control knobs, amplitude levels can be changed almost instantly. Low RF leakage levels are necessary to successfully test today’s sensitive receivers. The 8648 series meet these requirements with typically less than 1 μV leakage (nominally equivalent to 0.1 μV when measured with a two-turn loop).

For pricing information, or to receive an official price quotation for the Agilent 8648A Synthesized Signal Generator, 9 kHz to 1 GHz, please click on the "Request Quote" button below.

Cushman CE26A Signal Generator      

For pricing information, or to receive an official price quotation for the Cushman CE26A Signal Generator, please click on the "Request Quote" button.

Agilent 8648B Synthesized Signal Generator, 9 kHz to 2 GHz, Technical Specifications

Receiver testing has reached a new level of affordability. Ideal for in-channel receiver testing, Agilent Technologies’ additions to the economy line of RF signal generators offer improved performance at affordable prices. The 8648A/B/C/D provide 1, 2, 3.2 and 4 GHz coverage, respectively, with a simple user interface and the quality and reliability you expect from Agilent Technologies products.

Sensitivity measurements are easy to perform with the economy signal generator’s wide dynamic range. Covering the operating range of even the most sensitive receivers, the 8648A offers +10 to –136 dBm, while the 8648B/C/D provide +13 to –136 dBm output power levels. With ±1 dB level accuracy to –127 dBm below 1GHz, you can be assured of accurate repeatable measurements every time. Determine receiver sensitivity in seconds by scrolling through required test levels. With independent amplitude and frequency control knobs, amplitude levels can be changed almost instantly. Low RF leakage levels are necessary to successfully test today’s sensitive receivers. The 8648 series meet these requirements with typically less than 1 μV leakage (nominally equivalent to 0.1 μV when measured with a two-turn loop).

For pricing information, or to receive an official price quotation for the Agilent 8648B Synthesized Signal Generator, 9 kHz to 2 GHz, , please click on the "Request Quote" button below.

Agilent 8644B High Performance Signal Generator, 1 GHz or 2 GHz 

The Agilent 8644B signal generator represents the highest overall performance in Agilent's line of 1 GHz and 2 GHz signal generators. This generator has very low SSB phase noise (-136 dBc/Hz) and spurious (-105 dBc). Instead of mechanical relays, the Agilent 8644B uses solid state components accurate to within 1.0 dB for setting levels. An advanced internal modulation synthesizer provides coverage to 400 kHz and two-tone capability with the selection of sine, square, triangle, sawtooth, and white Gaussian noise waveforms.

Features:
• 252 kHz to 1030 MHz, 2060 MHz (Option 8644B-002)
• Lowest SSB phase noise and spurious
• Highest output power
• Lowest residual FM
• AM, FM, pulse modulation
• Built-in 2 GHz counter (Option 8644B-011)
• VOR/ILS signal simulation (Option 8644B-009)
• Ultra low leakage (Option 8644B-010)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8644B High Performance Signal Generator, 1 GHz or 2 GHz, please click on the "Request Quote" button below.

Agilent 8665A High-Performance Signal Generator, 4.2 GHz

The Agilent 8665A signal generator is suited for basic receiver testing up to 4.2 GHz. With Option 004 (low-noise enhancement), it can be used for out-of-channel receiver testing or as a clock source where having the lowest phase jitter is important. Radar testing can be done by adding Option 008 (pulse modulation) . Pulse width and delay can be internally adjusted between 50 ns and 999 ns, eliminating the need for an external pulse generator. Standard FM rates of up to 2 MHz and deviations to 20 MHz are suitable for many applications such as high-speed digital communications.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8665A High-Performance Signal Generator, 4.2 GHz, please click on the "Request Quote" button below.

Agilent 8664A High-Performance Signal Generator, 3 GHz 

The Agilent 8664A signal generator is suited for basic receiver testing up to 3.0 GHz. With Option 004 (low-noise enhancement), it can be used for out-of-channel receiver testing or as a clock source where having the lowest phase jitter is important. Radar testing can be done by adding Option 008 (pulse modulation) . Pulse width and delay can be internally adjusted between 50 ns and 999 ns, eliminating the need for an external pulse generator. Standard FM rates of up to 2 MHz and deviations to 10 MHz are suitable for many applications such as high-speed digital communications.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8664A High-Performance Signal Generator, 3 GHz, please click on the "Request Quote" button below.

Agilent 8672A Synthesized Signal Generator, 2 GHz to 18 GHz 

The Agilent 8672A synthesized signal generator delivers precise microwave signals over the 2.0 to 18.0 GHz frequency range.  It features calibrated and leveled output power, AM/FM modulation capability, and full HP-IB programmability.
The 8672A delivers exceptionally flat power across the full frequency range.  For receiver sensitivity measurements, power is internally (or externally) leveled and calibrated to -120 dBM.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8672A Synthesized Signal Generator, 2 GHz to 18 GHz, please click on the "Request Quote" button below.

Agilent E4432B ESG-D Series Digital RF Signal Generator, 3 GHz

Features:
• 250 kHz to 3 GHz frequency range
• RF modulation bandwidth up to 35 MHz
• Optional dual arbitrary waveform generator and/or real-time I/Q baseband generator
• 40 MHz sample rate and 14-bit I/Q resolution
• 1 Msample (4 MB) memory for waveform playback and 1 Msample (4 MB) memory for waveform storage
• Custom digital modulation (>15 variations of FSK, MSK, PSK, and QAM), AM, FM, phase modulation, pulse modulation, and step/list sweep (frequency and power)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4432B ESG-D Series Digital RF Signal Generator, 3 GHz,  please click on the "Request Quote" button below.

Agilent E4434B ESG-DP Series Digital RF Signal Generator, 1 GHz

Features:
• 250 kHz to 1 GHz frequency range with enhanced phase noise performance
• RF modulation bandwidth up to 35 MHz
• Optional dual arbitrary waveform generator and/or real-time I/Q baseband generator
• 40 MHz sample rate and 14-bit I/Q resolution
• 1 Msample (4 MB) memory for waveform playback and 1 Msample (4 MB) memory for waveform storage
• Custom digital modulation (>15 variations of FSK, MSK, PSK, and QAM), AM, FM, phase modulation, pulse modulation, and step/list sweep (frequency and power)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4434B ESG-DP Series Digital RF Signal Generator, 1 GHz,  please click on the "Request Quote" button below.

Agilent E8347C PSG CW Signal Generator, 40 GHz 

Low phase noise and high power CW signals
Providing premium performance at an affordable price, the E8247C PSG CW signal generator delivers industry-leading output power, superior level accuracy, and low phase noise for local oscillator and low jitter clock substitution and interference signal generation. It typically eliminates the need of an external amplifier for testing high power devices and minimizes test uncertainty to identify errors early in the design process and reduce development time. The PSG features advanced capability, including ramp sweep for continuous sweep measurements and fully automated use with the Agilent 8757D scalar network analyzer.

Modular architecture to meet your test requirements
Customize the PSG for RF and microwave test applications ranging from LO substitution and clock replacement to general-purpose troubleshooting and interference signal generation. A variety of optional performance enhancements and accessories are available. Its modular architecture makes it easy to configure the PSG to address your specific test application, providing the level of performance you need today and the option to upgrade in the future.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8347C PSG CW Signal Generator, 40 GHz, please click on the "Request Quote" button below.

Agilent 8175A Digital Signal Generator  

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8175A Digital Signal Generator, please click on the "Request Quote" button below.

Agilent E8254A PSG-A Series Performance Signal Generator, 40 GHz   

The Agilent Performance Signal Generator series offers accurate characterization of products and eliminates the need of an external amplifier for testing high power devices. The PSG series provides 14 dBm at 40 GHz (option 1EA), reducing overall equipment and test costs. The superior level accuracy of the PSG series (+/- 0.7 dB) reduces test uncertainties and improves production throughput. Standard products have phase noise performance of -85 dBc/Hz at 1 kHz offset and -110 dBc/Hz at 20 kHz offset and a 10 GHz carrier. The PSG provides improved performance with option UNJ of -98 dBc/Hz at 1 kHz offset and -110 dBc/Hz at 10 kHz offset and a 10 GHz carrier. Because the new PSG series guarantees accurate evaluation of devices, errors can be pinpointed early on in the design process thus resulting in a reduced development time.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8254A PSG-A Series Performance Signal Generator, 40 GHz, please click on the "Request Quote" button below.

Agilent N5181A MXG RF Analog Signal Generator  

Featuring high reliability and high power – all in two rack units (2RU) – Agilent MXG analog is optimized to provide the accurate and repeatable reference signals needed from the R&D bench to the production line. Add optional fast frequency and amplitude switching and MXG analog delivers the most value for your manufacturing investment by increasing throughput, maximizing uptime, and saving rack space. With scalable RF performance, the Agilent MXG analog is easily configured to meet your specific test needs, including LO and clock substitution, CW interferers, and modulated signals for analog communication systems such as AM, FM, and ΦM.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N5181A MXG RF Analog Signal Generator, please click on the "Request Quote" button below.

Agilent N5182A MXG RF Vector Signal Generator  

Featuring fast frequency, amplitude, and waveform switching, high power with an electronic attenuator, and high reliability – all in two rack units (2RU) – Agilent MXG vector is optimized for manufacturing cellular communications and wireless connectivity components. Agilent MXG vector provides better value for your investment by increasing throughput, improving test yield, maximizing uptime, and saving rack space. With scalable RF and baseband performance, the Agilent MXG vector is easily configured to meet your specific test needs.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N5182A MXG RF Vector Signal Generator, please click on the "Request Quote" button below.

Agilent 8780A Vector Signal Generator, 10 MHz to 3 GHz   

The Agilent 8780A vector signal generator is a synthesized IF source with exceptional modulation for modern receiver and component testing. It is capable of modulation bandwidths almost 100 times wider than previous synthesizers. It has built-in mapping to simplify generation of common digital modulation formats. Its extra-wide modulation bandwidth comes from a vector modulator that effectively doubles baseband modulation bandwidths for 700 MHz of output modulation. The vector signal generator' wideband modulation is complemented with an unmodulated coherent carrier output for demodulation of test signals. The Agilent 8780A vector signal generator offers a wide variety of modulation using both digital and analog inputs. It generates many standard digital modulation formats like QPSK and 16 QAM and traditional modulation like FM, AM, and pulse. By combining the different modulation types, signals as diverse as Barker-coded radar pulses and Doppler-shifted satellite signals can be simulated. The Agilent 8780A vector signal generator is well suited for receiver measurements where wideband or complex modulations are required. It can be used as a calibrated transmitter to test modern radar EW receivers or communication receivers using vector I/Q modulation techniques. It provides a stable, coherent carrier for pulse measurement. It can also be upconverted if receivers operate at frequencies higher than 3 GHz.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8780A Vector Signal Generator, 10 MHz to 3 GHz, please click on the "Request Quote" button below.

Agilent N5183A MXG Microwave Analog Signal Generator   

N5183A MXG microwave analog signal generators deliver the performance needed for broadband component manufacturing up to 40 GHz. This instrument provides ≤ 900 µs frequency switching (≤600 µs typically) to improve test times for applications like antenna test and manufacturing, with a small size (2RU) to better utilize rack space. Excellent power and level accuracy make the MXG microwave a reliable stimulus for driving high power devices. The MXG microwave can be configured to meet your test needs today, from LO substitution and CW interferer to analog modulation for device characterization, and is easily upgraded to meet your needs in the future.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N5183A MXG Microwave Analog Signal Generator, please click on the "Request Quote" button below.

Agilent E8663D PSG RF Analog Signal Generator    

The E8663D analog signal generator provides the industry’s lowest close-to-carrier phase noise available in an off-the-shelf signal generator. With optional analog modulation (AM, FM, ØM, and pulse) capability, superior level accuracy and high output power, the E8663D is the right choice for demanding applications such as radar system development, satellite communications evaluation, or when a very low noise local oscillator or reference signal is needed. Built on the outstanding legacy of the 8663A, the E8663D delivers improved performance and is fully code compatible with its predecessor for seamless upgrades to existing test systems. Enhanced narrow pulse modulation and extended support life are optionally available.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E8663D PSG RF Analog Signal Generator, please click on the "Request Quote" button below.

Marconi 2023 Signal Generator, 9 kHz to 1.2 GHz

• Wide frequency coverage:- 9 kHz to 1.2 GHz (2023)
• Linear and logarithmic sweep mode
• RPP to 50 W
• Sine, triangular and square wave two tone modulation source
• RS-232 and GPIB control
• Comprehensive modulation facilities:- Amplitude, Frequency, Phase, Pulse & FSK
• Excellent rack space efficiency
• Simple operation through menu selection of modes
• DC operation option
• Optional +25 dBm RF output

The 2023 and 2024 signal generators are portable and lightweight, offering carrier frequencies from 9 kHz to 1.2 GHz (2023), 9 kHz to 2.4 GHz (2024).
The instruments are suitable for a wide range of applications in laboratory, production, and maintenance environments.
The GPIB facility allows the unit to be included in ATE systems for faster manufacturing throughput. The inclusion of an RS-232 interface, with a command set to the GPIB facility, simplifies remote control of the signal generator in basic test systems or via a modem.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 2023 Signal Generator, 9 kHz to 1.2 GHz, please click on the "Request Quote" button below.

Rohde and Schwarz SMY02 Signal Generator, 9 kHz to 2080 MHz

Signal generators of the SMY family from Rohde&Schwarz are cost-effective instruments for testing AM, FM and jM receivers as well as for component measurements.
Two models are available: SMY01 with a frequency range from 9 kHz to 1040 MHz and SMY02 from 9 kHz to 2080 MHz.
Designed exclusively for the main applications of signal generators by cutting out the unnecessaries, SMY features an outstanding price/performance ratio. Thanks to its comprehensive basic features and excellent signal characteristics, it is an economical solution for universal use in lab, production and servicing environments.        

Features:
• Frequency resolution 1 Hz
• Level range -140 to +19 dBm, overrange up to 25 dBm (option)
• Level accuracy better than 1 dB
• SSB phase noise <-114 dBc at 1 GHz, Df = 20 kHz
• AM, FM, jM and pulse modulation
• Modulation generator 1 Hz to 500 kHz
• Sweep capabilities
• Nonvolatile memory for 100 complete front-panel setups
• RF overload protection 30 W (SMY01) or 50 W (SMY02)
• Low RF leakage (<0.1 mV)
• Calibration at 3-year interval

For pricing information, or to receive an official price quotation for the Rohde and Schwarz SMY02 Signal Generator, 9 kHz to 2080 MHz, please click on the "Request Quote" button below.

Wavetek 2001 Signal Generator

For pricing information, or to receive an official price quotation for the Wavetek 2001 Signal Generator, please click on the "Request Quote" button below.

The Gigatronics 6062A Synthesized RF Signal Generator

THE 6062A: OUTSTANDING CAPABILITY
The Giga-tronics 6062A Synthesized Signal Generator adds the modulation capability to generate complex signals from 100 kHz to 2.1GHz.
In addition to AM and FM, the 6062A offers fast-rise pulse modulation as a standard feature, so you can test pulsed communication and radar systems. And the 6062A features phase modulation for communications applications, such as receiver testing.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 6062A Synthesized RF Signal Generator, please click on the "Request Quote" button below.

Tektronix RTX130B MPEG RF Signal Generator

In the digital terrestrial broadcasting and cable environment, powerful RF-modulated signal generation functionality is required in a portable form factor for design, test, and maintenance.
The RTX130B QAM and VSB RF Signal Generator offers a flexible, affordable solution for design evaluation and conformance testing of digital video products conforming to the DVB-C / ITU-T J.83 standards, Annex A, B, C, and ATSC (8 VSB) standards for digital terrestrial and cable TV systems.

Features & Benefits:
• Provides a Complete Solution for QAM ITU-T J.83 Standards, Annex A (DVB-C), B, C, and VSB Signal Generation by Integrating a QAM and VSB Modulator, Up-converter, and MPEG Generator in a Portable Form Factor
• New: Integrated IPTV and Video over IP Stress Test Generation for Hybrid STB Test, or Migration from RF to IP Interface Technology
• New: Suite of Test Streams Provided as Standard and Optional Multiplexer Software Provides Complete Stream Creation and Generation Tool Set
• Real-time Updating of Time Stamps and Time Tables for Error-free Looping From Disk
• USB and GbE Interface for Loading of Transport Streams for Optimum Flexibility in Storing and Managing Transport Stream Libraries
• Integration with Automated Systems Enabled by Ethernet Remote Control using SCPI (Standard Command for Programmable Instruments) Command Set
• Quick and Easy Interpretation of Complex Structures by Utilizing a Large Color Hierarchical Display of Transport Stream Components
• Optional Tools for Transport Stream Creation and Analysis to Support Compliance and Stress Testing of Video Products Using MPEG-2 Technology
• Integrates with Tektronix Monitoring Tools for Powerful and Cost-effective Transport Stream Monitoring, and Error Recording

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix RTX130B MPEG RF Signal Generator, please click on the "Request Quote" button below.

Wavetek 3000 Signal Generator, 520 MHz

Features:
• 1 to 520 MHz frequency range with 1 kHz resolution
• Phase-lock stability over entire range
• Built-in frequency programmability
• Internal and external AM/FM capability

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix RTX130B MPEG RF Signal Generator, please click on the "Request Quote" button below.

Agilent E4432A Digital RF Signal Generator, 250 kHz to 3 GHz

The Agilent E4432A digital RF signal generator provides a wide range of digital modulation capabilities, in addition to a comprehensive feature set and excellent analog performance. The first in a new generation of signal generators, it provides excellent modulation accuracy and stability, as well as unprecedented level accuracy. It is ideally suited to meet the demanding requirements of today's digital receiver test, component test and local oscillator applications. The innovative design of the Agilent E4432A provides a flexible architecture that can be tailored to meet the changing demands of evolving markets. Lower initial cost, high reliability and a two-year calibration cycle, all minimize the cost of ownership. The Agilent E4432A digital generator is designed for long-term dependability, which maximizes production throughput and uptime.

Features:
• 250 kHz up to 3 GHz
• Flexible, expandable architecture with upgrade path for options
• Electronic attenuator, built-in function generator, superior level accuracy, and step sweep (frequency, power and list)
• Built-in digital modulation formats for DECT, GSM, NADC, PDC, PHS, and TETRA (Option UN3/UN4)
• External analog I and Q inputs
• Versatile data generation with burst capabilities
• Wideband AM

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4432A Digital RF Signal Generator, 250 kHz to 3 GHz, please click on the "Request Quote" button below.

Agilent 8656B Synthesized Signal Generator, 0.1 to 990 MHz

The Agilent 8656B is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 0.1 to 990 MHz frequency range. Offering ±1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the Agilent 8656B provides precise output control. In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources. These features create a versatile signal generator, for use in a variety if applications.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8656B Synthesized Signal Generator, 0.1 to 990 MHz, please click on the "Request Quote" button below.

Agilent N9310A RF Signal Generator, 9 kHz to 3 GHz

The N9310A is ideal for electronic manufacturing test for modern consumer products like cordless phones, digital radios, GPC modules, RFIDs and wireless LAN devices. It is the first in this new entry-level of RF basic instruments. It comes with all the capability and reliability you need – at a price you always wanted.

The signal generator is easy to operate. It generates common RF signals from 9kHz up to 3 GHz. With the built-in analog modulation capabilities, it can generate modulated AM, FM, QM and pulse signal easily. Adding optional analog Iq input capability; it can generate complex IQ modulated signals such as GSM, cdma and OFDM signals from custom IQ inputs.

Features:
• 9 kHz to 3 GHz CW output, 20 Hz to 80 kHz low frequency (LF) output
• -127 to +13 dBm output level range (maximum +20 dBm settable)
• -95 dBc/Hz SSB phase noise
• Full sweep function: RF (9 kHz to 3 GHz) /Amplitude (-127 to +13 dBm), LF (20 Hz to 80 kHz)
• Extensive analog modulation: AM, FM, Phase, and Pulse modulation
• Optional IQ modulator, 40 MHz bandwidth

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N9310A RF Signal Generator, 9 kHz to 3 GHz, please click on the "Request Quote" button below.

Agilent 8673B Signal Generator, 2 GHz to 26 GHz

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 8673B Signal Generator, 2 GHz to 26 GHz, please click on the "Request Quote" button below.

Tektronix TSG120 YC NTSC TV Signal Generator

The TSG120 is aYC/ NTSC Signal Generator designed for testing of cable and transmission systems. The standard configuration offers 75% bars over red, pluge, convergence, red/green/blue fields, multiburst, pulse & bar, staircase, modulated ramp, chroma noise, 0/50/100 IRE flat fields, matrix and 0-100 IRE bounce signals. Option 02 is customized to perform many FCC conformance tests. It features cable sweep, cable multiburst, (sin x)/x, NTC7 matrix, FCC composite, smpte bars, 75% color bars, 0/50/100% flat field, cable matrix, transmission matrix, staircase, multiburst, field square wave, and bounce signals.

Fluke 54200 Multi-standard Video & TV Signal Generator

Meet the 54000 Series from Fluke, a range of easy to use instruments to test TVs, VCRs, set top boxes and other video equipment. According to any video standard. And with today’s widest choice of highly accurate signals.

Two models
There are two compact models in the series. The Fluke 54100 Video Signal Generator is the obvious choice for testing video circuitry. The Fluke 54200 TV Signal Generator offers additional sound test signals and a highly stable RF output, making it ideal for complete testing of TV sets, VCRs or other related equipment. Both models offer selectable TV standards (PAL, NTSC, SECAM), text functions and a choice of signal outputs. You can choose from a number of readily available pre-configurations, or select an instrument that precisely matches your testing requirements, specifying options from a range of stereo sound, data services and interface functions. You’ll find all details on the separate option and ordering information inserts.

All applications
The digitally generated test signals of the Fluke 54000 Series comply with the recommendations of the CCIR, EBU, FCC, ITU and EIA standards for analog television. This versatility, combined with the high signal quality (stability and purity) makes them ideal for testing TV receivers, VCRs, camcorders, observation systems and set-top decoder boxes, and also for checking the performance of individual sub-assemblies or components used in these products.

Easy to Use
These generators are excellent examples of Fluke’s reputation for easy-to-use instruments:
• Select the main functions directly on the front-panel keyboard. More advanced functions can be accessed using soft keys and the large LCD (Liquid Crystal Display) with its familiar graphical interface.
• Accurately set luminance and chrominance amplitudes with the up and down keys or the numerical keyboard.
• Store up to 99 different test situation settings for later instantaneous recall.
• Finally, to make it even more convenient, a number of country specific settings have been pre-programmed. Just think of the time this will save you.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 54200 Multi-standard Video & TV Signal Generator, please click on the "Request Quote" button below.

Kenwood SG-5115 AM FM Signal Generator

This instrument is for sale. For pricing information, or to receive an official price quotation, please click on the "Request Quote" button.

Philips 5418 TDSI + Y/C TV Signal Generator

Multi-standard for the world’s needs: All the signals you need for TV,VCR and monitor testing

Select the configuration that matches your test needs and budget

• Over 100 video test patterns for PAL, NTSC and SECAM video standards
• High-precision, digitally generated patterns for geometry alignment
• 16:9 and 4:3 aspect ratio patterns
• Special patterns for VCR and 100 Hz IDTV (Improved Definition TV) testing
• Mono, Stereo, NICAM and MTS Stereo plus SAP (BTSC) sound test signals
• Teletext TOP/FLOF, VPT and Antiope test signals
• Easily programmable PDC (Program Delivery Control) and VPS test signals
• Closed Caption test signals
• Full RF coverage from 32 to 900 MHz with int./ext. modulation
• RGB, Y/C (S-VHS/Hi-8), CVBS and audio outputs
• IEEE-488 programmable

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation, please click on the "Request Quote" button.

Philips PM5418 TDSI + Y/C TV Color TV Pattern & Signal Generator

Multi-standard for the world’s needs: All the signals you need for TV,VCR and monitor testing

Select the configuration that matches your test needs and budget

* Over 100 video test patterns for PAL, NTSC and SECAM video standards
* High-precision, digitally generated patterns for geometry alignment
* 16:9 and 4:3 aspect ratio patterns
* Special patterns for VCR and 100 Hz IDTV (Improved Definition TV) testing
* Mono, Stereo, NICAM and MTS Stereo plus SAP (BTSC) sound test signals
* Teletext TOP/FLOF, VPT and Antiope test signals
* Easily programmable PDC (Program Delivery Control) and VPS test signals
* Closed Caption test signals
* Full RF coverage from 32 to 900 MHz with int./ext. modulation
* RGB, Y/C (S-VHS/Hi-8), CVBS and audio outputs
* IEEE-488 programmable

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation, please click on the "Request Quote" button.

Rohde & Schwarz SMHU Signal Generator 100 kHz to 4320 MHz

The frequency can be set with a resolution of 0.1 Hz over the entire range, and this is sufficient even for measurements on extremely narrowband DUTs. Both instruments supply frequencies down to 1 kHz.

R&S®SMGU and R&S®SMHU are ideal for applications which the majority of signal generators cannot handle. In addition to out-of-channel measurements, they are for instance able to determine the spurious rejection of radiotelephone equipment up to 4 GHz as laid down by CEPT.

Spectral purity is the key contribution of the Agilent 8663A signal generator, making it ideal for many radar, satellite communication, and phase noise measurement applications. Typical absolute phase noise performance of this generator at a 1 kHz offset is as low as -135 dBc/Hz, depending on the band of operation. The frequency range of the Agilent 8663A is 100 kHz to 2560 MHz. It offers versatile AM, FM, phase (option 002), and pulse modulation using either internal or externally applied modulating signals. A programmable 10 Hz to 99.9 kHz modulation synthesizer provides internal rate generation for all four modulation types and can be swept in either a log or linear fashion. The signal generator also has simultaneous modulation capability. The Agilent 8663A has the U.S. Air Force MATE capability via Option 700. This option is an external translator that allows the signal generator to be controlled by the MATE language, CIIL.

• <-147 dBc/Hz SSB phase noise at 10 kHz offset
• 0.1 Hz frequency resolution
• AM, FM, phase, and pulse modulation in one generator
• Internal 10 Hz to 99.9 kHz modulation synthesizer
• Optional MATE capability