Agilent 435B RF Power Meter

The Agilent 435B RF Power Meter is an analog power meter, compatible with the entire series of Agilent 8480 power sensors. Depending on which sensor is used, the 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 110 GHz. This versatile instrument also features <1 percent instrumentation uncertainty, low noise and drift, auto-zero, recorder output, optional battery operation, and long cable options up to 61 m (200 ft).

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 435B RF Power Meter, please click on the "Request Quote" button below.

Rohde and Schwarz NRVS Power Meter  

Uncompromizing technology and ease of operation make the NRVS an ideal instrument for any kind of power measurement in manifold laboratory and system applications. Thanks to its unique measuring heads with calibration data memory and temperature sensor, which make adjustments by the user superfluous, the NRVS measures at all times with high accuracy and free of operator’s errors.
The range of measuring heads includes thermal power sensors as well as highly sensitive diode power sensors, peak power sensors, probes and insertion units for voltage measurements. The NRVS covers a power span from 100 pW up to the kW range. In addition to the power sensors, all voltage probes of the URV5-Z series can be used.

Features:
• Accurate, general-purpose,easy-to-use
• Intelligent measuring heads: just plug them in and measure
• DC frequency input for tracking frequency response correction
• Analog output
• Remote control of all functions via IEC/IEEE bus

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz NRVS Power Meter, please click on the "Request Quote" button below.

Agilent E4417A EPM-P Series Dual Channel Power Meter

The E4417A dual channel EPM-P series power meter, is designed for peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors.

Specifications:
• 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals
• Time-gated and free run power measurements
• Free ´Analyzer Software´ software for complete pulse and statistical analysis, software is located ´In the Library´
• 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth, IS-95 CDMA, W-CDMA and cdma 2000)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4417A EPM-P Series Dual Channel Power Meter, please click on the "Request Quote" button below.

Compatible power sensors: E4410 and E9300 E-Series, 8480 Series and N8480 Series average power sensors
Frequency range: 9 kHz to 110 GHz,sensor dependent
Power range: –70 dBm to +44 dBm (100 pW to 25 W), sensor dependent

Measurement speed
Three measurement speed modes, over the GPIB, are available as shown, along with the typical maximum measurement speed for each mode.
With the Agilent E4419B power meter:
Measurement speed is reduced, for example, with both channels in FAST mode, the typical maximum measurement speed is 100 readings/second.

Power meter functions
Accessed by key entry: either hardkeys, or softkey menu, and programmable.
Zero: Zeros the meter. (Power reference calibrator is switched off during zeroing).
Cal: Calibrates the meter using internal (power reference calibrator)
or external source. Reference cal factor settable from 1% to 150%, in 0.1% increments.
Frequency: Entered frequency range is used to interpolate the calibration factors table.
Range: 1 kHz to 999.9 GHz, settable in 1-kHz steps.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4419B EPM Series Dual-Channel Power Meter, please click on the "Request Quote" button below.

The Agilent E4418A is a low-cost, high-performance, single-channel, programmable power meter. It is fully compatible with the Agilent 8480 series of power sensors and the E-series of power sensors. Depending upon which sensor is used, the Agilent E4418A can measure from -70 dBm to +44 dBm at frequencies from 100 kHz to 110 GHz. Designed for bench and automatic test equipment (ATE) use, the Agilent E4418A makes fast (up to 200 readings per second with E-series sensors), accurate and repeatable power measurements.

The E4418A power meter has a high-resolution LCD display with LED backlighting and contrast control. This allows users to see the power readings from a distance, at a wide viewing angle and in a variety of lighting conditions. The user interface is easy to learn and use, with hardkeys for the most frequently used functions, and softkey menus to simplify instrument configuration for different applications.
Ten instrument configurations can be saved and recalled, reducing the need to repeat setup sequences.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4418A EPM Series Single-Channel Power Meter, please click on the "Request Quote" button below.

Compatible power sensors: E4410 and E9300 E-Series, 8480 Series and N8480 Series average power sensors
Frequency range: 9 kHz to 110 GHz,sensor dependent
Power range: –70 dBm to +44 dBm (100 pW to 25 W), sensor dependent

Measurement speed
Three measurement speed modes, over the GPIB, are available as shown, along with the typical maximum measurement speed for each mode.
With the Agilent E4418B power meter:
Normal: 20 readings/second x2: 40 readings/second
Fast: 200 readings/second

Power meter functions
Accessed by key entry: either hardkeys, or softkey menu, and programmable.
Zero: Zeros the meter. (Power reference calibrator is switched off during zeroing).
Cal: Calibrates the meter using internal (power reference calibrator)
or external source. Reference cal factor settable from 1% to 150%, in 0.1% increments.
Frequency: Entered frequency range is used to interpolate the calibration factors table.
Range: 1 kHz to 999.9 GHz, settable in 1-kHz steps.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4418B EPM Series Single-Channel Power Meter, please click on the "Request Quote" button below.

Anritsu ML9001A Optical Power Meter 

The ML9001A is a single-channel digital-display optical power meter.
It ensures accuracy and linearity over a wide wavelength range and greatly improves measurement reliability. It also has an improved basic performance. For example, measurements can be made over the wide level range from –100 to +20 dBm because internal reflection in the power sensors has been suppressed. The ML9001A also has many new functions that make it easier to use than other power meters.
It can be used for all optical power measurements such as optical fiber loss measurement and optical device performance evaluation.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu ML9001A Optical Power Meter, please click on the "Request Quote" button below.

Acterna OLP-8 Pocket-Sized Optical Power Meter  

The OLP product line of pocket-sized optical power meters provides an excellent price/performance ratio for universal, singlemode loss test and systems power measurements.

The OLP Pocket-Sized Optical Power Meters can be part of a Pocket-Sized Optical Test Kit. The Pocket-Sized Optical Test Kits contain one power meter and one light source as standard. This combination is ideal for power and loss measurement.

Features:
• TWINtest cuts test time in half and simplifies handling due to automatic attenuation measurements at 850/1300 nm or 1310/1550 nm.
• Auto-lambda automatic wavelength detection and simple fiber identification together with an Acterna OLS light source.
• Easy three-button operation lets you concentrate on your work at hand.
• Lightweight, portable, rugged, and shock-proof design guarantees long life.
• Universal push-pull adapter (UPP)
• a long battery lifetime (>130 hours)
• Battery replacement indicator
• Powered from standard dry batteries or rechargeable cells
• Includes a handy nylon belt pouch

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Acterna OLP-8 Pocket-Sized Optical Power Meter, please click on the "Request Quote" button below.

Agilent E4416A EPM-P Series Single Channel Power Meter 

The E4416A single channel EPM-P series power meter, for peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors.

Specifications:
• 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals
• Time-gated and free run power measurements
• Free ´Analyzer Software´ software for complete pulse and statistical analysis, software is located ´In the Library´
• 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth™, IS-95 CDMA, W-CDMA and cdma2000)

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4416A EPM-P Series Single Channel Power Meter, please click on the "Request Quote" button below.

General Features of Agilent N1911A N1912A P-Series Power Meters and N1921A N1922A Wideband Power Sensors

Number of channels
N1911A P-Series power meter, single channel
N1912A P-Series power meter, dual channel

Frequency range
N1921A P-Series wideband power sensor, 50 MHz to 18 GHz
N1922A P-Series wideband power sensor, 50 MHz to 40 GHz

Measurements
Average, peak and peak-to-average ratio power measurements are provided with free-run or time gated definition. Time parameter measurements of pulse rise time, fall time, pulse width, time to positive occurrence and time to negative occurrence are also provided.

Sensor compatibility
P-Series power meters are compatible with all Agilent P-Series wideband power sensors, E-series sensors and 8480 series power sensors1 Compatibility with the 8480 and E-Series power sensors will be available in a future firmware release, free of charge.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N1911A P-Series Power Meter Single Channel, please click on the "Request Quote" button below.

Agilent 436A Single Channel RF Power Meter 

The Agilent 436A power meter is a general-purpose digital power meter intended for manual and automatic radio-frequency (RF) and microwave-power measurements. It is compatible with the entire series of 8480 power sensors. The 436A measures either absolute or relative power. It displays absolute power in either watts or dBm, and relative power in dB. The 436A offers intuitive and straightforward manual operation as well as optional GPIB programmability (Option 022).

Specifications:
• Display readings in Watts, dBm or dB relative eliminating measurement conversion
• Peaking meter for analog adjustments
• Cal factor to compensate each sensor for improved accuracy
• Frequency Range: 100 kHz to 110 GHz
• Power Range: -70 to +44 dBm
• Power Accuracy: ±0.5%
• Power Reference: Internal 50 MHz oscillator/Type-N output

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 436A Single Channel RF Power Meter, please click on the "Request Quote" button below.

JDS Uniphase OLP55-01 Optical Power Meter 780nm to 1650nm   

The OLP-55 SMART Optical Power Meter is a high-performance power meter for testing, installing, and maintaining singlemode and multimode cables and networks. It creates a new industry standard in accuracy with its unique built-in auto-zeroing function (patent pending) for auto dark current compensation, allowing for increased accuracy in measurements.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the JDS Uniphase OLP55-01 Optical Power Meter 780nm to 1650nm, please click on the "Request Quote" button below.

JDS Uniphase OLP55-04 Optical Power Meter 800nm to 1700nm   

The OLP-55 SMART Optical Power Meter is a high-performance power meter for testing, installing, and maintaining singlemode and multimode cables and networks. It creates a new industry standard in accuracy with its unique built-in auto-zeroing function (patent pending) for auto dark current compensation, allowing for increased accuracy in measurements.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the JDS Uniphase OLP55-04 Optical Power Meter 800nm to 1700nm, please click on the "Request Quote" button below.

EXFO FOT-22AX Handheld Optical Power Meter     

Features:
• Direct loss measurement in dB
• Five electronically calibrated wavelengths
• Shockproof holster also acts as storage compartment for fiberoptic adapters and replacement battery
• Auto-off function
• FOT-20A: power measurements in dB, dBm and W

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the EXFO FOT-22AX Handheld Optical Power Meter, please click on the "Request Quote" button below.

EXFO FPM-300 Handheld Optical Power Meter     

The FPM-300 Power Meter is part of EXFO’s new line of handheld units, which includes the
FLS-300 Light Source and the FOT-300 Optical Loss Test Set.

• Highly accurate unit offering 10 calibrated wavelengths and reference values
• Power autonomy of 300 hours
• Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
• Ergonomic, eye-catching handheld package

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the EXFO FPM-300 Handheld Optical Power Meter, please click on the "Request Quote" button below.

Marconi 6960B RF Power Meter      

The 6960B RF Power Meter is a high accuracy instrument which together with its associated power sensors provides measurements at frequencies from 30 kHz up to 46 GHz over a wide range of power levels. Its numeric keyboard enables easy manual control while full GPIB implementation with SRQ mask and trigger modes make it the logical choice for fast ATE systems.

Features:
• Extensive frequency coverage: 30 kHz to 46 GHz
• Wide dynamic range: -70 dBm (100 pW) to +44 dBm (25W)
• Fast response on GPIB of 25 ms
• Auto averaging with manual override
• Both 50 Ω and 75 Ω sensors
• Low sensor VSWR reduces measurement uncertainty
• Sensor linearity correction for improved accuracy
• Maximum hold facility
• Optional DC operation
• Non-volatile memory

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Marconi 6960B RF Power Meter, please click on the "Request Quote" button below.

Yokogawa WT210 Digital Power Meter

Features:
• Basic power accuracy: 0.1%
• DC measurement, 0.5 Hz to 100 kHz power frequency range
• Compact design (half-rack size)
• 5 mA range for very low current measurements (model WT210 only)
• Line filter function
• High-speed data update (as fast as 10 readings per second)
• Harmonic measurement function available
• User calibration capability

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Yokogawa WT210 Digital Power Meter, please click on the "Request Quote" button below.

Yokogawa WT1600 Digital Power Meter DC to 1 MHz     

Features:
• Frequency Power Range DC, 0.5 Hz to 1 MHz
• Basic Power Accuracy: ±0.1%
• Current Input Range: 10 mA to 5 A or 1 A to 50 A
• Voltage Input Range: 1.5 V to 1000 V
• Up to Six Input Elements in one Instrument (3 phase power input from two systems in one unit)
• 50 ms data storing interval
• Standard integration and harmonic measurement functions
• A variety of display formats 
• Standard external current sensor input for use with current clamps

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Yokogawa WT1600 Digital Power Meter DC to 1 MHz, please click on the "Request Quote" button below.

Gigatronics 8541 Universal Power Meter      

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 8541 Universal Power Meter, please click on the "Request Quote" button below.

Gigatronics 8541C Universal Power Meter    

The Giga-tronics 8540C Series Universal Power Meters combine accuracy, speed, range and measurement capabilities unavailable from any other power meter. Built-in features such as power sweep calibration and frequency calibration provide an unequalled degree of measurement accuracy.
Only the 8540C Series power meters have the speed and range to meet the throughput demands of high volume manufacturing.
And the meters can measure the CW, peak and true average power of the complex modulated signals used in EW, radar, and communications systems.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 8541C Universal Power Meter, please click on the "Request Quote" button below.

Gigatronics 8542C 2 Channel Digital Power Meter    

The Giga-tronics 8540C Series Universal Power Meters combine accuracy, speed, range and measurement capabilities unavailable from any other power meter. Built-in features such as power sweep calibration and frequency calibration provide an unequalled degree of measurement accuracy.
Only the 8540C Series power meters have the speed and range to meet the throughput demands of high volume manufacturing.
And the meters can measure the CW, peak and true average power of the complex modulated signals used in EW, radar, and communications systems.

Features:
•Frequency Range 100 kHz to 40 GHz, depending on sensor used
•Power Range: -70 to +47 dBm, depending on sensor used
•Choose from an extensive line of CW, Peak, Modulation and True RMS sensors
•Single Sensor Dynamic Range:
 -CW Power Sensors: 90 dB (-70 to +20 dBm)
 -Modulation Power Sensors: 87 dB CW, 60 to 80 dB Modulation Mode
 -Peak Power Sensors: 50 dB CW, 47 dB Peak
•Linearity � 0.02 dB
•Automatically measure average power of TDMA, GSM, and CDMA signals
•Optional Time Gating to program a measurement's start time and duration
•Achieve 500 reading per second over GPIB
•Use the Fast Buffered Mode to capture up to 4000 readings per second
•Measure the instantaneous peak power level of a pulse modulated signal

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 8542C 2 Channel Digital Power Meter, please click on the "Request Quote" button below.

Gigatronics 8651A Universal Power Meter, 1 Channel      

The Giga-tronics 8650A Series Universal Power Meters (model# 8651A with single channel and 8652A with dual channel) have the extensive measurement capabilities and features you need to test today's sophisticated communications systems faster, easier and more accurately.

The 8650A can measure the CW power, peak power and average power of TDMA, GSM, and CDMA (both IS-95 and third-generation 10 MHz wide band) signals. CW measurement speeds (readings/second) over GPIB are >1,750 and modulated measurement speeds are >300. And the meter includes many time saving features such as automatic time gate setting, direct crest factor measurement, and statistical power measurement analysis.

Features:
•100 kHz to 40 GHz Frequency Range, depending on sensor
•-70 to +47 dBm Power Range, depending on sensor
•Linearity ±0.02 dB
•GPIB CW Measurement Speed (rdgs/s):
 -Normal Mode >300
 -Swift Mode >1,750
 -Buffered Mode >26,000
•GPIB Modulated Measurement Speed (rdgs/s):
 -Normal Mode >150
 -Swift Mode >300
 -Buffered Mode >800
•Uniform Sample Rate of 20 MHz and Random Sample Rate from 2.5 to 5 MHz
•20 MHz Maximum Diode Sensor Video Bandwidth
•10 MHz Instrument Video Bandwidth
•Maximum CW Single Sensor Dynamic Range: 90 dB
•Maximum Single Sensor Dynamic Range:
 -TDMA/GSM 60 dB
 -CDMA (IS-95) 80 dB
 -CDMA ((10 MHZ bandwidth) 80 dB
•100 ns Maximum Peak Power Sensor Rise Time
•Automatic Time Gate Setting
•Direct Crest Factor Measurement
•Statistical Power Measurement Analysis

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 8651A Universal Power Meter, 1 Channel, please click on the "Request Quote" button below.

Gigatronics 8652A Universal Power Meter, 2 Channel       

The Giga-tronics 8650A Series Universal Power Meters (model# 8651A with single channel and 8652A with dual channel) have the extensive measurement capabilities and features you need to test today's sophisticated communications systems faster, easier and more accurately.

The 8650A can measure the CW power, peak power and average power of TDMA, GSM, and CDMA (both IS-95 and third-generation 10 MHz wide band) signals. CW measurement speeds (readings/second) over GPIB are >1,750 and modulated measurement speeds are >300. And the meter includes many time saving features such as automatic time gate setting, direct crest factor measurement, and statistical power measurement analysis.

Features:
•100 kHz to 40 GHz Frequency Range, depending on sensor
•-70 to +47 dBm Power Range, depending on sensor
•Linearity ±0.02 dB
•GPIB CW Measurement Speed (rdgs/s):
 -Normal Mode >300
 -Swift Mode >1,750
 -Buffered Mode >26,000
•GPIB Modulated Measurement Speed (rdgs/s):
 -Normal Mode >150
 -Swift Mode >300
 -Buffered Mode >800
•Uniform Sample Rate of 20 MHz and Random Sample Rate from 2.5 to 5 MHz
•20 MHz Maximum Diode Sensor Video Bandwidth
•10 MHz Instrument Video Bandwidth
•Maximum CW Single Sensor Dynamic Range: 90 dB
•Maximum Single Sensor Dynamic Range:
 -TDMA/GSM 60 dB
 -CDMA (IS-95) 80 dB
 -CDMA ((10 MHZ bandwidth) 80 dB
•100 ns Maximum Peak Power Sensor Rise Time
•Automatic Time Gate Setting
•Direct Crest Factor Measurement
•Statistical Power Measurement Analysis

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 8652A Universal Power Meter, 2 Channel, please click on the "Request Quote" button below.

Wavetek 1034A Power Meter

For pricing information, or to receive an official price quotation for the Wavetek 1034A Power Meter, please click on the "Request Quote" button below.

Wavetek 8501 Microwave Peak Power Meter    

Features:
• Single or Repetitive Pulse and CW Measurements from 30 MHz to 40 GHz
• Accurately Reads Pulses to 15 Nanoseconds
• Graphics Mode for Plot of Pulse and Reading Point
• Automatic Detector Calibration

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Wavetek 8501 Microwave Peak Power Meter, please click on the "Request Quote" button below.

Hameg HM8115-2 Programmable Power Meter, 8 kW  

Features:
• Wide measurement range 1mW…8kW
• Voltage range 100mV…500 V, current range 1mA…16 A
• Frequency range DC…1 kHz
• Simultaneous voltage, current and power display
• Display of apparent, effective and reactive power
• Power factor display
• Autoranging, simple operation
• Monitor output (BNC) representing the instantaneous active power
• Suitable for measurements on frequency converters
• Software for remote control and data acquisition included
• Galvanically isolated USB/RS-232 Interface, optional IEEE-488

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Hameg HM8115-2 Programmable Power Meter, 8 kW, please click on the "Request Quote" button below.

EXFO FOT-20A Handheld Fiber Optic Power Meter     

Features:
• Direct loss measurement in dB
• Five electronically calibrated wavelengths
• Shockproof holster also acts as storage compartment for fiberoptic adapters and replacement battery
• Auto-off function
• FOT-20A: power measurements in dB, dBm and W

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the EXFO FOT-20A Handheld Fiber Optic Power Meter, please click on the "Request Quote" button below.

Fluke 345 Power Quality Clamp Meter Specifications

The ideal meter for commissioning and troubleshooting modern electrical loads.

With a bright color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Additionally, the Hall Effect measurement system makes measurement of dc current possible without the need to break the circuit, and the internal memory enables long-term logging for analysis of
trends or intermittent problems.

• AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
• Highest safety rating: 600 V CAT IV rated for use at the service entrance
• Accurate in noisy environments: Even with distorted waveforms present on electronic loads with low-pass filter
• Data logging: Identify intermittent faults by logging any power parameters for minutes or months, including harmonics
• Verify batteries: Direct measurement of dc ripple (%) for battery and dc systems
• Troubleshoot harmonics: Analyze and log harmonics digitally or graphically
• Inrush current: Capture and analyze nuisance tripping, from 3 seconds to 300 seconds
• Easy to use: Easily confirm instrument setup with large backlit color display of waveforms and trends
• 3-Phase power: Built in capability for balanced loads
• View graphs and generate reports: With included Power Log software

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 345 Power Quality Clamp Meter , please click on the "Request Quote" button below.

EXFO FPM-302 Optical Power Meter     

The FPM-300 Power Meter is part of EXFO’s new line of handheld units, which includes the
FLS-300 Light Source and the FOT-300 Optical Loss Test Set.

• Highly accurate unit offering 10 calibrated wavelengths and reference values
• Power autonomy of 300 hours
• Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
• Ergonomic, eye-catching handheld package

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the EXFO FPM-302 Optical Power Meter, please click on the "Request Quote" button below.

EXFO FPM-302X Optical Power Meter     

The FPM-300 Power Meter is part of EXFO’s new line of handheld units, which includes the
FLS-300 Light Source and the FOT-300 Optical Loss Test Set.

• Highly accurate unit offering 10 calibrated wavelengths and reference values
• Power autonomy of 300 hours
• Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
• Ergonomic, eye-catching handheld package

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the EXFO FPM-302X Optical Power Meter, please click on the "Request Quote" button below.

EXFO FPM-602X Optical Power Meter       

The FPM-600 is a very powerful tool for the most demanding applications such as high-speed DWDM or CWDM network qualification. With more than 40 calibrated wavelengths, including all CWDM wavelengths, it allows for user-defined measurement wavelengths, using the interpolation method between calibrated points. Use its Hold Min/Max Power function to measure system power burst or fluctuations.

• High accuracy, wide dynamic range and high power measurement capability (up to 26 dBm)
• Memory capacity of 1000 data items; enables data transfer to a PC via USB connection
• User-configurable pass/fail thresholds with LED indicator
• Over 40 calibrated wavelengths, and Hold Min/Max Power function
• Rechargeable batteries
• Visual fault locator (VFL) option for quick and easy troubleshooting
• Error-free, time-saving test features: automatic wavelength switching, no offset nulling
• Low cost of ownership: three-year warranty and recommended calibration interval

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the EXFO FPM-602X Optical Power Meter, please click on the "Request Quote" button below.

Agilent 5348A 26.5 GHz Microwave Counter Power Meter  

The Agilent 5348A 26.5 GHz Microwave Counter/Power Meter offers the convenience of a single instrument that makes frequency and power measurements with accuracy and resolution comparable to stand-alone instruments. As a true power meter, the 5348A offers excellent dynamic range, linearity, and accuracy. It uses the same proven power sensors as standalone power meters. The high performance frequency counter measures frequency from 10 Hz to 26.5 GHz.

With only five function keys, the 5348A is especially easy to use. Its rugged, lightweight package, along with an optional internal battery that provides up to two hours of cordless measurements, makes the 5348A ideal for taking portable measurements.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 5348A 26.5 GHz Microwave Counter Power Meter, please click on the "Request Quote" button below.

Gigatronics 8502A Dual Channel Peak Power Meter       

The Giga-tronics 8500A Series Peak Power Meters (model# 8501A with single channel and 8502A with dual channel) combine CW power measurement with the ability to make precise peak power measurements at any point on a pulsed waveform. This dual, built-in capability lets you make CW measurements and analyze pulsed waveforms with a single instrument.

The meter is available in a single or dual channel configuration. A built-in display shows measurements such as rise time, fall time and pulse width plus the pulse profile. And you can use a reference cursor to read peak power at any point on the pulse waveform.

Giga-tronics CW and Peak power sensors contain an EEPROM programmed with the frequency calibration factors measured at the factory, or in your cal lab. When you key in the frequency at which power is being measured, the meter automatically applies the correct cal factor from the sensor EEPROM.

Features:
•Rise time < 15 ns
•Sensor frequency range from 0.03 or 0.75 to 18.5, 26.5 or 40 GHz
•Power Range: -20 to +20 dBm Pulse; -40 to +20 dBm CW
•Measurement resolution is 100 ps
•Measure the same point on repetitive pulses at over 70 measurements/second
•Built-in power sweep calibrator with NIST traceable accuracy

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 8502A Dual Channel Peak Power Meter, please click on the "Request Quote" button below.

Rohde and Schwarz NRVD Power Meter, Dual Channel 

The NRVD covers a total bandwidth of 40 GHz and a power span from 100 pW up to the kW range. Being individually and absolutely calibrated, the measuring heads can be interchanged as required without impairing specified error limits.
The wide range of measuring heads includes thermal power sensors as well as highly sensitive diode power sensors, peak power sensors, probes and insertion units for voltage measurements.

Features:
• Accurate, general-purpose, easy-to-use
• Attenuation and reflection measurements
• Two independent channels measuring simultaneously
• Operating modes: average power, reflection, pulse power, AM, DC
• Manual or automatic range selection
• Intelligent measuring heads – just plug them in and measure straightaway
• Readout: Absolute in W, dBm, V, dBV, dBμV, relative in dB, %, A/B, B/A, A–B, B–A
• Remote control of all functions via IEC/IEEE bus to SCPI

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Rohde and Schwarz NRVD Power Meter, Dual Channel, please click on the "Request Quote" button below.

Agilent 438A Dual Sensor Power Meter 

The Agilent 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the 8480 series of power sensors.

Specifications:
•Two power sensors for multi-port measurement
•Ratio mode for measuring gain compression
•Programmable high and low power limits for unattended power monitoring
•Frequency: 100 kHz to 26.5 GHz
•Power Range: -70 to +44 dBm
•Dynamic Range: 50 dB
•Measurement Modes: A, B, A-B, B-A, A/B, B/A

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 438A Dual Sensor Power Meter, please click on the "Request Quote" button below.

General Features of Agilent N1911A N1912A P-Series Power Meters and N1921A N1922A Wideband Power Sensors

Number of channels
N1911A P-Series power meter, single channel
N1912A P-Series power meter, dual channel

Frequency range
N1921A P-Series wideband power sensor, 50 MHz to 18 GHz
N1922A P-Series wideband power sensor, 50 MHz to 40 GHz

Measurements
Average, peak and peak-to-average ratio power measurements are provided with free-run or time gated definition. Time parameter measurements of pulse rise time, fall time, pulse width, time to positive occurrence and time to negative occurrence are also provided.

Sensor compatibility
P-Series power meters are compatible with all Agilent P-Series wideband power sensors, E-series sensors and 8480 series power sensors1 Compatibility with the 8480 and E-Series power sensors will be available in a future firmware release, free of charge.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the N1912A P-Series power meter, dual channel, please click on the "Request Quote" button below.

Kyoritsu 6300 Power Meter  

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Kyoritsu 6300 Power Meter, please click on the "Request Quote" button below.

Rohde & Schwarz NRP Power Meter Specifications 

• Innovative multipath sensor technology
• 90 dB dynamic range
• High measurement speed
• Intelligent sensors – simply plug in and measure
• Accurate measurement of average power regardless of bandwidth and modulation
• Multislot measurements for common time division systems (e.g. GSM/EDGE, DECT)
• Handling of external components through Γ and s-parameter correction
• Simultaneous operation of up to 4 sensors on basic unit
• Operation of sensor directly from PC USB interface
• 2-year calibration cycle

 Designed for R&D 

Top measurement accuracy plus a dynamic range of 90 dB for broadband signals of any modulation are the most requested characteristic s of a modern power meter. The versatile R&S NRP sensors in feature exactly these characteristics and are a priceless investment if you wish to meet future requirements such as the broadband modulation types of thirdgeneration mobile radio. In addition, they are also capable of handling the RF bandwidths beyond 100 MHz that are already under discussion for wireless LAN.

A power meter must of course be easy to operate: The numerous sensor functions can be activated via an intuitive user interface, and the high-resolution display indicates up to 4 measurement results at a time. As with other power meters from Rohde & Schwarz, all calibration data is stored in the sensor, which ensures highprecision measurements by minimizing operating errors. 

Ideal for production

If you have ever dealt with microwave power measurements, you know that the necessary filtering of results due to the noise characteristics of the sensor as well as delays in measurement range selection and command/result processing can have negative effects on throughput in production. And this is where the R&S NRP with its innovative features offers straightforward solutions:

• Autofilter
• Parallel processing
• Speed

It goes without saying that the basic unit, which can accommodate up to 4 sensors at the same time, can be fully remotecontrolled. In addition, the sensors can directly be connected to a PC. It is good to know that the sensors can perform reliable measurements for an extended period of time owing to the long calibration interval of 2 years.

For pricing information, or to receive an official price quotation for the Rohde & Schwarz NRP Power Meter, please click on the "Request Quote" button below.

Yokogawa WT110 Digital Power Meter     

For pricing information, or to receive an official price quotation for the Yokogawa WT110 Digital Power Meter, please click on the "Request Quote" button below.

Agilent 5347A Microwave Counter Power Meter, 20 GHz  

The Agilent 5347A 20 GHz Microwave Counter/Power Meter offers the convenience of a single instrument that makes frequency and power measurements with accuracy and resolution comparable to stand-alone instruments. As a true power meter, the Agilent 5347A offers excellent dynamic range, linearity, and accuracy. It uses the same proven power sensors as HP's standalone power meters. The high-performance frequency counter measures frequency from 10 Hz to 20 GHz.

With only five function keys, the Agilent 5347A is especially easy to use. Its rugged, lightweight package, along with an optional internal battery that provides up to two hours of cordless measurements, makes the Agilent 5347A ideal for taking portable measurements.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 5347A Microwave Counter Power Meter, 20 GHz, please click on the "Request Quote" button below.

The Agilent E4419A is a low-cost, high-performance, dual-channel, programmable power meter.  It is fully compatible with the HP 8480 series of power sensors and the new E series of power sensors. Depending upon which sensor is used, the Agilent E4419A can measure from -70 dBm to +44 dBm at frequencies from 100 kHz to 110 GHz.

Designed for bench and automatic test equipment use (ATE), the E4419A makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.  The Agilent E4419A is a true dual-channel power meter, which means that you get two simultaneous power readings on the display.

The Agilent E4419A power meter has a high-resolution LCD display with LED backlighting and contrast control. This allows users to see the power readings from a distance, at a wide angle and in a variety of lighting conditions. Users can display both the digital and the analog types of readout on the meter's split screen facility. The analog peaking meter allows users to make accurate adjustments.

The user interface is easy to learn and use, with hardkeys for the most frequently used functions, and softkey menus to simplify instrument configuration for different applications.
Difference (A-B, B-A) and ratio (A/B, B/A) functions are provided, and ten instrument configurations can be saved and recalled, reducing the need to repeat setup sequences.
 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E4419A EPM Series Dual-Channel Power Meter, please click on the "Request Quote" button below.

Agilent N1913A EPM Series Single-Channel Power Meter

The Agilent N1913A and N1914A power meters are versatile, user-friendly replacements for the E4418B/19B EPM series. Get consistent results and greater capability with the new EPM power meters.

Key Specifications
• Frequency range of 9 kHz to 110 GHz (sensor dependent)
• Wide dynamic range of -70 to +44 dBm (sensor dependent)
• Speed improvement by 2X for E-Series sensors: up to 400 readings/sec
• Go beyond GPIB with LAN LXI-C and USB connectivity
• Code-compatible with E4418B, E4419B power meters
• Code-compatible with 436A, 437B and 438A power meters (option 200)
• Increased measurement channels: up to three channels with two additional U2000 Series power sensors connected using the optional USB hosts
• Automated frequency/power sweep measurements with the optional external trigger in/out feature

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N1913A EPM Series Single-Channel Power Meter, please click on the "Request Quote" button below.

Agilent N1914A EPM Series Dual-Channel Power Meter 

The Agilent N1913A and N1914A power meters are versatile, user-friendly replacements for the E4418B/19B EPM series. Get consistent results and greater capability with the new EPM power meters.

Key Specifications
• Frequency range of 9 kHz to 110 GHz (sensor dependent)
• Wide dynamic range of -70 to +44 dBm (sensor dependent)
• Speed improvement by 2X for E-Series sensors: up to 400 readings/sec
• Go beyond GPIB with LAN LXI-C and USB connectivity
• Code-compatible with E4418B, E4419B power meters
• Code-compatible with 436A, 437B and 438A power meters (option 200)
• Increased measurement channels: up to three channels with two additional U2000 Series power sensors connected using the optional USB hosts
• Automated frequency/power sweep measurements with the optional external trigger in/out feature

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N1914A EPM Series Dual-Channel Power Meter, please click on the "Request Quote" button below.

Yokogawa WT230 Digital Power Meter

Features:
• Basic power accuracy: 0.1%
• DC measurement, 0.5 Hz to 100 kHz power frequency range
• Compact design (half-rack size)
• 5 mA range for very low current measurements (model WT210 only)
• Line filter function
• High-speed data update (as fast as 10 readings per second)
• Harmonic measurement function available
• User calibration capability

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Yokogawa WT230 Digital Power Meter, please click on the "Request Quote" button below.

Gigatronics 8501A Single Channel Peak Power Meter       

The Giga-tronics 8500A Series Peak Power Meters (model# 8501A with single channel and 8502A with dual channel) combine CW power measurement with the ability to make precise peak power measurements at any point on a pulsed waveform. This dual, built-in capability lets you make CW measurements and analyze pulsed waveforms with a single instrument.

The meter is available in a single or dual channel configuration. A built-in display shows measurements such as rise time, fall time and pulse width plus the pulse profile. And you can use a reference cursor to read peak power at any point on the pulse waveform.

Giga-tronics CW and Peak power sensors contain an EEPROM programmed with the frequency calibration factors measured at the factory, or in your cal lab. When you key in the frequency at which power is being measured, the meter automatically applies the correct cal factor from the sensor EEPROM.

Features:
•Rise time < 15 ns
•Sensor frequency range from 0.03 or 0.75 to 18.5, 26.5 or 40 GHz
•Power Range: -20 to +20 dBm Pulse; -40 to +20 dBm CW
•Measurement resolution is 100 ps
•Measure the same point on repetitive pulses at over 70 measurements/second
•Built-in power sweep calibrator with NIST traceable accuracy

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Gigatronics 8501A Single Channel Peak Power Meter, please click on the "Request Quote" button below.