Anritsu 37347C Vector Network Analyzer, 40 MHz to 20 GHz 

The Lightning 37200C/37300C Vector Network Analyzers (VNAs) are high performance tools designed to make fast and accurate Sparameter measurements of active and passive devices across the 22.5 MHz to 65 GHz range. These network analyzers integrate a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing.
The Lightning 37100C VNAs are configured as Direct-Access Receivers for antenna, frequency conversion, and multiple output device measurements. These network analyzers consist of a synthesized source and tuned receiver in a single compact unit, with direct access provided to all four receiver samplers via the front panel. The 37100C offers the ultimate flexibility to meet most receiver measurement needs, while maintaining the ability to measure all four S-parameters with the addition of a reflectometer setup at the front end of the receiver.

Features:
• Fast Sweeping Synthesized Source
• Auto Reversing Test Set (37200C/37300C models only)
• Solid-State Transfer Switch (37200C/37300C models only)
• Four Independent Display Channels
• Multiple Source Control of Two External Sources
• Four Channel Receiver
• Internal Hard and Floppy Disk Drives
• LRL/LRM Calibration
• Adapter Removal Calibrations
• Fast Measurement Throughput via GPIB
• Built-In AutoCal® Control 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu 37347C Vector Network Analyzer, 40 MHz to 20 GHz, please click on the "Request Quote" button below.

Anritsu 37369C Vector Network Analyzer, 40 MHz to 40 GHz

The Lightning 37200C/37300C Vector Network Analyzers (VNAs) are high performance tools designed to make fast and accurate Sparameter measurements of active and passive devices across the 22.5 MHz to 65 GHz range. These network analyzers integrate a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing.
The Lightning 37100C VNAs are configured as Direct-Access Receivers for antenna, frequency conversion, and multiple output device measurements. These network analyzers consist of a synthesized source and tuned receiver in a single compact unit, with direct access provided to all four receiver samplers via the front panel. The 37100C offers the ultimate flexibility to meet most receiver measurement needs, while maintaining the ability to measure all four S-parameters with the addition of a reflectometer setup at the front end of the receiver.

Features:
• Fast Sweeping Synthesized Source
• Auto Reversing Test Set (37200C/37300C models only)
• Solid-State Transfer Switch (37200C/37300C models only)
• Four Independent Display Channels
• Multiple Source Control of Two External Sources
• Four Channel Receiver
• Internal Hard and Floppy Disk Drives
• LRL/LRM Calibration
• Adapter Removal Calibrations
• Fast Measurement Throughput via GPIB
• Built-In AutoCal® Control 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu 37369C Vector Network Analyzer, 40 MHz to 40 GHz, please click on the "Request Quote" button below.

Anritsu 37397C Vector Network Analyzer, 40 MHz to 65 GHz

The Lightning 37200C/37300C Vector Network Analyzers (VNAs) are high performance tools designed to make fast and accurate Sparameter measurements of active and passive devices across the 22.5 MHz to 65 GHz range. These network analyzers integrate a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing.
The Lightning 37100C VNAs are configured as Direct-Access Receivers for antenna, frequency conversion, and multiple output device measurements. These network analyzers consist of a synthesized source and tuned receiver in a single compact unit, with direct access provided to all four receiver samplers via the front panel. The 37100C offers the ultimate flexibility to meet most receiver measurement needs, while maintaining the ability to measure all four S-parameters with the addition of a reflectometer setup at the front end of the receiver.

Features:
• Fast Sweeping Synthesized Source
• Auto Reversing Test Set (37200C/37300C models only)
• Solid-State Transfer Switch (37200C/37300C models only)
• Four Independent Display Channels
• Multiple Source Control of Two External Sources
• Four Channel Receiver
• Internal Hard and Floppy Disk Drives
• LRL/LRM Calibration
• Adapter Removal Calibrations
• Fast Measurement Throughput via GPIB
• Built-In AutoCal® Control 

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu 37397C Vector Network Analyzer, 40 MHz to 65 GHz, please click on the "Request Quote" button below.

Anritsu 54100A Network Analyzer, 1 MHz to 110 GHz

54100A series Network Analyzers provide characterization of devices such as amplifiers, antennas, attenuators, adapters,  RF bridges, duplexers, couplers, attenuators, cables, waveguide transmission lines, isolators, circulators, mixers, receivers,  transceivers, up/down converters, multiplexers, power dividers, VCOs, switches, and filters. Advanced hardware and software features speed productivity and improve accuracy. Speed tuning processes with automated bandwidth search functions.  Fast recall mode quickly steps through test procedures and sophisticated limit line controls quickly identify conformance  to specifications. Low source harmonics and high directivity SWR autotesters assure accuracy.

Features:
• Fast, accurate measurement of transmission, return loss, precision return loss, SWR, group delay, absolute power, and distance-to-fault
• Crystal-based source for exceptional stability and accuracy
• Built-in automation features including distance-to-fault
• Built-in floppy disk drive
• Rugged, reliable chassis

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu 54100A Network Analyzer, 1 MHz to 110 GHz, please click on the "Request Quote" button below.

Anritsu 54147A Scalar Network Analyzer, 10 MHz to 20 GHz

54100A series Network Analyzers provide characterization of devices such as amplifiers, antennas, attenuators, adapters,  RF bridges, duplexers, couplers, attenuators, cables, waveguide transmission lines, isolators, circulators, mixers, receivers,  transceivers, up/down converters, multiplexers, power dividers, VCOs, switches, and filters. Advanced hardware and software features speed productivity and improve accuracy. Speed tuning processes with automated bandwidth search functions.  Fast recall mode quickly steps through test procedures and sophisticated limit line controls quickly identify conformance  to specifications. Low source harmonics and high directivity SWR autotesters assure accuracy.

Features:
• Fast, accurate measurement of transmission, return loss, precision return loss, SWR, group delay, absolute power, and distance-to-fault
• Crystal-based source for exceptional stability and accuracy
• Built-in automation features including distance-to-fault
• Built-in floppy disk drive
• Rugged, reliable chassis

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu 54147A Scalar Network Analyzer, 10 MHz to 20 GHz, please click on the "Request Quote" button below.

Anritsu 54169A Scalar Network Analyzer, 10 MHz to 40 GHz

54100A series Network Analyzers provide characterization of devices such as amplifiers, antennas, attenuators, adapters,  RF bridges, duplexers, couplers, attenuators, cables, waveguide transmission lines, isolators, circulators, mixers, receivers,  transceivers, up/down converters, multiplexers, power dividers, VCOs, switches, and filters. Advanced hardware and software features speed productivity and improve accuracy. Speed tuning processes with automated bandwidth search functions.  Fast recall mode quickly steps through test procedures and sophisticated limit line controls quickly identify conformance  to specifications. Low source harmonics and high directivity SWR autotesters assure accuracy.

Features:
• Fast, accurate measurement of transmission, return loss, precision return loss, SWR, group delay, absolute power, and distance-to-fault
• Crystal-based source for exceptional stability and accuracy
• Built-in automation features including distance-to-fault
• Built-in floppy disk drive
• Rugged, reliable chassis

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu 54169A Scalar Network Analyzer, 10 MHz to 40 GHz, please click on the "Request Quote" button below.

Anritsu 56100A Scalar Network Analyzer, 10 MHz to 110 GHz

The 56100A Scalar Network Analyzer measures insertion loss, insertion gain, or RF power with 76 dB dynamic range. Measure device match as return loss in dB or as SWR. Separate detectors can be used on all four inputs for multiple transmission measurements on duplexers or matched amplifiers.

Transmission and reflection measurements can be viewed simultaneously. Both traces can be scaled independently in dB, dBm, or SWR. Measurement of the ratio of two detector inputs may be applied to either channel for enhancing accuracy or for viewing differences. Built in calibration allows subtraction of the unwanted transmission frequency response or the average of open/short reflections from either trace. A Volt Mode is available for displaying voltage (with volt mode adapter cable). A 0 to 10 volt sweep ramp output mode is also available.

Features:
• Compatible with Anritsu 68/B/C and 69A/B sweep generators
• 10 MHz to 110 GHz
• Four input channels
• Extensive cursor, markers, and limit lines
• Applications functions for improved productivity

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Anritsu 56100A Scalar Network Analyzer, 10 MHz to 110 GHz, please click on the "Request Quote" button below.

Features & Benefits 

• GSM, GPRS/EDGE, UMTS testing
• Testing of frame relay, ATM and IP
• Generation of up to 8 VoIP calls simultaneously on Ethernet test interfaces in the CMA 3000. For one VoIP call at the time the voice quality measurement option can provide information on MOS and R-factor for the call.
• Generation of up to 8 ISDN (PRI) calls simultaneously.
• Test interfaces for SDH, PDH, Ethernet and data interfaces
• Comprehensive out-of-service testing for installation, provisioning and propagation time analysis
• In-service, bi-directional monitoring at all speeds for fast troubleshooting, traffic monitoring, identification of synchronization problems and error performance measurement
• Performance analysis
• Physical line monitoring
• Intuitive user interface, with large color touch-screen display and easy-to-understand graphical symbols
• Quickly customize and store setup and result screens to fit your personal needs and work routines
• Easy-to-install options
• Powered by a high-capacity LiIon battery

Interfaces

Efficiency and profitability go hand in hand and provide you with full duplex monitoring of signals out and back in one compact, self-contained unit.

The CMA 3000 is the portable, compact, and user-friendly all-in-one field tester for fixed and mobile networks. It is designed specifically for technicians who install, maintain, and troubleshoot mobile-access, fixed-access and transmission networks and switching.

The CMA 3000 has the unique ability to maintain and optimize existing networks and test networks while they are in operation. That means problems are pinpointed faster, there is less network downtime, and field visits are much more efficient.

The basic CMA 3000 configuration is the ideal instrument for measuring in- and out-of-service transmission quality of 2 Mbps lines. With its SDH test module the CMA 3000 field test instrument also supports simultaneous bi-directional monitoring of SDH lines. Further options allow test and monitoring of Ethernet 10/100/1000 lines and V-series interfaces.

The modular design provides you with a clear and cost-effective upgrade path: by adding options the CMA 3000 becomes a highly flexible field tester with the ability to test a large number of interfaces and technologies, including IP over Ethernet, ATM, frame relay lines, and the Abis interface of GSM/GPRS networks. Other options turn the CMA 3000 into a very powerful and advanced signaling analyzer for GSM, GPRS/EDGE, SS7, and ISDN protocols.
VoIP and ISDN (PRI) call emulation can also be added as options. Up to 8 VoIP calls or 8 ISDN PRI) calls can be generated simultaneously. For one VoIP call at the time the voice quality measurement option can provide information on MOS and R-factor for the call.

With the Ethernet multistream option and an Ethernet interface option on the CMA 3000, the user can test and analyse up to 8 traffic streams on one Ethernet line. Hereby the user can test a congested networks ability to transport high priority traffic rather than lower priority traffic.

The user can activate up to 8 streams with different priority settings on the Ethernet line and detect how they are affected by frame loss through the network.